Publicação

Development of a microfluidic paper-based analytical device (µPAD) for iron determination in water

Ver documento

Detalhes bibliográficos
Resumo:Ingestion of waters with high iron concentration can cause several risks to human health. In this work, a new microfluidic paper-based analytical device (µPAD) was developed to quantify iron in surface and waste waters using a new fluorescent 3-hydroxy-4-pyridione ligand. Under optimal conditions, a linear calibration curve was obtained in the concentration range of 0.25 – 2.00 mg/L with a limit detection of 0.11 mg/L. The proposed µPAD method was successfully applied to the determination of iron in surface and waste water samples with no need for sample pre-treatment, and its accuracy evaluated by comparing to the AAS standard method (RD < 10%). The developed µPAD is simple, economical, sensitive and present low analysis time. Each µPAD uses low amounts of reagents, approximately 0.5 mg of ligand and 17 mg of sodium hydrogenocarbonate and sample consumption of 100 µL.
Autores principais:Aguiar, Juliana I. S.
Outros Autores:Ribeiro, Susana O.; Leite, Andreia; Rangel, Maria; Rangel, António O. S. S.; Mesquita, Raquel B. R.
Ano:2022
País:Portugal
Tipo de documento:atas de conferência
Tipo de acesso:acesso aberto
Instituição associada:Universidade Católica Portuguesa
Idioma:inglês
Origem:Veritati - Repositório Institucional da Universidade Católica Portuguesa
Descrição
Resumo:Ingestion of waters with high iron concentration can cause several risks to human health. In this work, a new microfluidic paper-based analytical device (µPAD) was developed to quantify iron in surface and waste waters using a new fluorescent 3-hydroxy-4-pyridione ligand. Under optimal conditions, a linear calibration curve was obtained in the concentration range of 0.25 – 2.00 mg/L with a limit detection of 0.11 mg/L. The proposed µPAD method was successfully applied to the determination of iron in surface and waste water samples with no need for sample pre-treatment, and its accuracy evaluated by comparing to the AAS standard method (RD < 10%). The developed µPAD is simple, economical, sensitive and present low analysis time. Each µPAD uses low amounts of reagents, approximately 0.5 mg of ligand and 17 mg of sodium hydrogenocarbonate and sample consumption of 100 µL.

Atividades financiadas

Não foram encontrados projetos financiados.