Publicação
Fiber-Optic Inclinometer Based on Taper Michelson Interferometer
| Resumo: | A compact fiber-optic inclinometer based on a fiber-taper Michelson interferometric sensor is constructed and demonstrated. The sensor consist of a single symmetrically taper waist of 80 micron distanced 30 mm from the single-mode fiber end-tip right-angled cleaved. The amplitude of the bending angle of the fiber taper interferometer is obtained by passive interferometric interrogation based on the generation of two quadrature phase-shifted signals from two fiber Bragg gratings with different resonant wavelengths. Optical phase-to-bending sensitivity of ~1.13 rad/degree and a bend angle resolution of ~0.014degree/Hz^1/2 were achieved. |
|---|---|
| Autores principais: | Amaral, L. M. N. |
| Outros Autores: | Frazao, O.; Santos, J. L.; Lobo Ribeiro, Antonio B. |
| Assunto: | Fiber Bragg gratings Fiber taper Inclinometer Modal sensor Tilt measurement |
| Ano: | 2011 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade Fernando Pessoa |
| Idioma: | inglês |
| Origem: | Repositório Institucional da Fernando Pessoa |
| Resumo: | A compact fiber-optic inclinometer based on a fiber-taper Michelson interferometric sensor is constructed and demonstrated. The sensor consist of a single symmetrically taper waist of 80 micron distanced 30 mm from the single-mode fiber end-tip right-angled cleaved. The amplitude of the bending angle of the fiber taper interferometer is obtained by passive interferometric interrogation based on the generation of two quadrature phase-shifted signals from two fiber Bragg gratings with different resonant wavelengths. Optical phase-to-bending sensitivity of ~1.13 rad/degree and a bend angle resolution of ~0.014degree/Hz^1/2 were achieved. |
|---|
Atividades financiadas
Não foram encontrados projetos financiados.