Publicação
Modelamento, fabricação e caracterização de seções polarizadoras em fibras de cristal fotônico altamente birrefringentes
| Resumo: | Photonic crystal fibers have been proposed as single-polarization (or polarizing) fibers with important applications being demonstrated, for example, in telecommunications, sensing and georeferencing. Although the vast majority of reported studies have focused on the numerical analysis of the performance of PCFs with specific and unconventional designs, post-processing PCFs also allows for great flexibility in altering the characteristics of guidance. In this work, the structure of a commercial, highly birefringent, PCF, with different holes diameters, has been locally changed using a tapering technique, which reduces the transverse dimensions of the fiber, with the application of pressure in the holes. This process was implemented to create 1-cm-long sections with a 66% reduction in their cross-sectional dimensions, through the application of pressure using two different schemes. It is numerically and experimentally shown that the two resulting structures are polarizing. In the first scheme, the same pressure is applied to all holes, resulting in a polarizing PCF at a wavelength of 633 nm, with an experimentally obtained polarization extinction ratio (PER) of 6.44 dB. In the second scheme, the applied pressure was different for the large and small holes, resulting in a polarizing PCF for the 1510-1590 nm wavelength range, with an experimentally obtained PER of more than 30 dB. Both the simplicity of the method and the resulting PER compares favorably with alternative methods to create polarizing conventional and photonic crystal fibers. |
|---|---|
| Autores principais: | Romagnoli, Priscila |
| Assunto: | fibras de cristal fotônico fibras polarizadoras afilamento birrefringência photonic crystal fibers single-polarization fibers polarizing fibers tapering birefringence CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
| Ano: | 2016 |
| País: | Brasil |
| Tipo de documento: | dissertação de mestrado |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | IBICT |
| Idioma: | português |
| Origem: | Oasisbr |
| Resumo: | Photonic crystal fibers have been proposed as single-polarization (or polarizing) fibers with important applications being demonstrated, for example, in telecommunications, sensing and georeferencing. Although the vast majority of reported studies have focused on the numerical analysis of the performance of PCFs with specific and unconventional designs, post-processing PCFs also allows for great flexibility in altering the characteristics of guidance. In this work, the structure of a commercial, highly birefringent, PCF, with different holes diameters, has been locally changed using a tapering technique, which reduces the transverse dimensions of the fiber, with the application of pressure in the holes. This process was implemented to create 1-cm-long sections with a 66% reduction in their cross-sectional dimensions, through the application of pressure using two different schemes. It is numerically and experimentally shown that the two resulting structures are polarizing. In the first scheme, the same pressure is applied to all holes, resulting in a polarizing PCF at a wavelength of 633 nm, with an experimentally obtained polarization extinction ratio (PER) of 6.44 dB. In the second scheme, the applied pressure was different for the large and small holes, resulting in a polarizing PCF for the 1510-1590 nm wavelength range, with an experimentally obtained PER of more than 30 dB. Both the simplicity of the method and the resulting PER compares favorably with alternative methods to create polarizing conventional and photonic crystal fibers. |
|---|
Atividades financiadas
Não foram encontrados projetos financiados.