Publication
Numerical and experimental assessment of stainless and carbon bolted tensioned members with staggered bolts
| Summary: | Current stainless steel design codes, like the Eurocode 3, part 1.4, (2006), are still largely based on analogies with carbon steel structural behavior. The net section rupture represents one of the ultimate limit states usually verified for structural elements submitted to normal tension stress. An investigation aiming to evaluate the tension capacity of carbon and stainless steel bolted structural elements was performed and in this article, the results are discussed and compared in terms of stress distribution, and force-displacement curves, among others. The result assessment was done by comparisons to the Eurocode 3 (2003) provisions for carbon and stainless steels. The investigation indicated that when stainless steel is used in certain structural engineering applications like joints under tension forces, the current design criteria based on deformation limits need to be re-evaluated, especially due to the differences in the yields for ultimate deformation and stress ratios. |
|---|---|
| Main Authors: | Santos,João de Jesus dos |
| Other Authors: | Silva,André Tenchini da; Lima,Luciano Rodrigues Ornelas de; Vellasco,Pedro Colmar Gonçalves da Silva; Andrade,Sebastião Arhur Lopes de; Silva,José Guilherme Santos da |
| Subject: | Stainless steel tension resistance nonlinear analysis bolted joints finite element method |
| Year: | 2013 |
| Country: | Brazil |
| Document type: | article |
| Access type: | open access |
| Associated institution: | IBICT |
| Language: | English |
| Origin: | Oasisbr |
| Summary: | Current stainless steel design codes, like the Eurocode 3, part 1.4, (2006), are still largely based on analogies with carbon steel structural behavior. The net section rupture represents one of the ultimate limit states usually verified for structural elements submitted to normal tension stress. An investigation aiming to evaluate the tension capacity of carbon and stainless steel bolted structural elements was performed and in this article, the results are discussed and compared in terms of stress distribution, and force-displacement curves, among others. The result assessment was done by comparisons to the Eurocode 3 (2003) provisions for carbon and stainless steels. The investigation indicated that when stainless steel is used in certain structural engineering applications like joints under tension forces, the current design criteria based on deformation limits need to be re-evaluated, especially due to the differences in the yields for ultimate deformation and stress ratios. |
|---|
Funded activities
No funded projects found.