Publicação

Blood flow visualization and measurements in microfluidic devices fabricated by a micromilling technique

Detalhes bibliográficos
Resumo:	The most common and used technique to produce microfluidic devices for biomedical applications is the soft-lithography. However, this is a high cost and time-consuming technique. Recently, manufacturers were able to produce milling tools smaller than 100 μm and consequently have promoted the ability of the micromilling machines to fabricate microfluidic devices capable of performing cell separation. In this work, we show the ability of a micromilling machine to manufacture microchannels down to 30 μm and also the ability of a microfluidic device to perform partial separation of red blood cells from plasma. Flow visualization and measurements were performed by using a high-speed video microscopy system. Advantages and limitations of the micromilling fabrication process are also presented.
Autores principais:	Singhal, Jaron
Outros Autores:	Pinho, Diana; Lopes, Raquel; Sousa, Patrícia C.; Garcia, Valdemar; Schütte, Helmut; Lima, Rui A.; Gassmann, Stefan
Assunto:	Biomedical applications Blood cells Cell-free layer Cells separation Microfluidic devices Micromilling
Ano:	2015
País:	Portugal
Tipo de documento:	artigo
Tipo de acesso:	acesso aberto
Instituição associada:	Universidade Politécnica de Bragança
Idioma:	inglês
Origem:	Biblioteca Digital da UPB

Descrição
Resumo:	The most common and used technique to produce microfluidic devices for biomedical applications is the soft-lithography. However, this is a high cost and time-consuming technique. Recently, manufacturers were able to produce milling tools smaller than 100 μm and consequently have promoted the ability of the micromilling machines to fabricate microfluidic devices capable of performing cell separation. In this work, we show the ability of a micromilling machine to manufacture microchannels down to 30 μm and also the ability of a microfluidic device to perform partial separation of red blood cells from plasma. Flow visualization and measurements were performed by using a high-speed video microscopy system. Advantages and limitations of the micromilling fabrication process are also presented.

Carregando projetos financiados...