Publicação
Potentiometric determination of cetylpyridinium chloride in oral desinfectants by flow injection analysis
| Resumo: | The work describes a new procedure for cetylpyridinium chloride determination in oral disinfectants, based on a flow-injection system with potentiometric detection. The determination was based on the measurement of picrate concentration decrease as result of ion-pair reaction with the analyte present in the injected sample. In the optimised set-up the sample injection volume was kept at 400 µL and merged downstream with the reagent solution containing 1,0 x10-5 mol/L of picrate adjusted to pH 5.0 with citrate/citric acid buffer. The flow rate was fixed at 8 mL/min and the reactor length at 40 cm. The proposed procedure enables the determination of cetylpyridinium in the analytical range of 5,0x10-6 – 7,5x10-5 mol/L at a sampling rate of 60/h. The results for real samples had a precision better than 3% and were comparable to the labelled values. |
|---|---|
| Autores principais: | Baptista, Paula |
| Outros Autores: | Araújo, Alberto N.; Montenegro, Maria da Conceição B.S.M. |
| Assunto: | Potentiometry Oral disinfectants FIA Ion-selective electrodes Cationic surfactants Spectrophotometric determination Pharmaceutical preparations Capillary electrophoresis Pair extraction Construction Titrations Sensor |
| Ano: | 2003 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade Politécnica de Bragança |
| Idioma: | português |
| Origem: | Biblioteca Digital da UPB |
| Resumo: | The work describes a new procedure for cetylpyridinium chloride determination in oral disinfectants, based on a flow-injection system with potentiometric detection. The determination was based on the measurement of picrate concentration decrease as result of ion-pair reaction with the analyte present in the injected sample. In the optimised set-up the sample injection volume was kept at 400 µL and merged downstream with the reagent solution containing 1,0 x10-5 mol/L of picrate adjusted to pH 5.0 with citrate/citric acid buffer. The flow rate was fixed at 8 mL/min and the reactor length at 40 cm. The proposed procedure enables the determination of cetylpyridinium in the analytical range of 5,0x10-6 – 7,5x10-5 mol/L at a sampling rate of 60/h. The results for real samples had a precision better than 3% and were comparable to the labelled values. |
|---|
Atividades financiadas
Não foram encontrados projetos financiados.