Publication

Erratum to: In Situ Phase Evolution of Ni/Ti Reactive Multilayers (J. of Materi Eng and Perform, vol 23, pg 2446, 2014)

Bibliographic Details
Main Authors:	Cavaleiro, A. J.
Other Authors:	Ramos, A. S.; Martins, R. M. S.; Baehtz, C.; Vieira, M. T.; Braz Fernandes, F. M.
Subject:	General Materials Science Mechanics of Materials Mechanical Engineering
Year:	2014
Country:	Portugal
Document type:	other
Access type:	open access
Associated institution:	Universidade Nova de Lisboa
Language:	English
Origin:	Repositório Institucional da UNL

Similar Items

Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy
by: Lopes, J. G.
Published: (2024)

Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
by: Shen, Jiajia
Published: (2023)

Unveiling the macrosegregation formation mechanism and its impact on properties in dissimilar welding between CoCrFeMnNi high-entropy alloy and 316 stainless steel
by: Shen, Jiajia
Published: (2025)

Recovery mechanisms in a compressed ni-ti superelastic alloy
by: Daer, Shimeni Baptista
Published: (2018)

Characterisation of Ti/Al multilayered structures with slow positron beams applying a simplified positron depth distribution model
by: Naia, M. Duarte
Published: (2010)

Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel
by: Oliveira, João Pedro
Published: (2022)

Powder mode in laser direct energy deposition repair of AlSi7Mg revealed by in-situ X-ray imaging
by: Zhang, Xiaolin
Published: (2026)

Tackling Humidity with Designer Ionic Liquid-Based Gas Sensing Soft Materials
by: Esteves, Carina
Published: (2022)

Preface
by: Dimitrovová, Zuzana
Published: (2023)

Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition
by: Silva, Tadeu C. da
Published: (2025)

In situ monitoring of wire and arc additive manufacturing by digital image correlation
by: Cunha, Filipa G.
Published: (2022)

Resistance spot welded NiTi shape memory alloy to Ti6Al4V
by: Zang, Yihu
Published: (2025)

Etchability Dependence of InO x and ITO Thin Films by Plasma Enhanced Reactive Thermal Evaporation on Structural Properties and Deposition Conditions
by: Amaral, Ana
Published: (2018)

Ni-based superalloy 718 fabricated by arc-based directed energy deposition
by: Farias, Francisco Werley Cipriano
Published: (2025)

Effect of post weld heat treatment on the microstructure and mechanical properties of gas tungsten arc welded Al0.3CoCrFeNi high entropy alloy
by: Palguna, Yasam
Published: (2024)

Travelling colourful patterns in self-organized cellulose-based liquid crystalline structures
by: Silva, Pedro E. S.
Published: (2021)

Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting
by: Li, Binqiang
Published: (2022)

Inconel 718 fabricated via arc-based directed energy deposition assisted with in situ interlayer hot forging
by: Farias, Francisco Werley Cipriano
Published: (2025)

Photothermoelectric AZO/SiO2/NiO Device
by: Bianchi, Catarina
Published: (2023)

Inflation mechanics of aortic phantoms
by: Mesquita, Hugo
Published: (2024)

Tailoring high strength and heat resistance of Al-Ni-Fe-Zr near-eutectic alloy fabricated by laser powder bed fusion
by: Li, Feng
Published: (2026)

On a continuum theory of brittle materials with microstructure
by: Duda,Fernando Pereira
Published: (2004)

Transmissibility versus damage detection
by: Maia, Nuno M. M.
Published: (2018)

Deformations and stresses of multilayered plates with embedded functionally graded material layers using a layerwise mixed model
by: Moleiro, F.
Published: (2019)

Fabrication of spatially-variable heterostructured CoCrFeMnNi high entropy alloy by laser processing
by: Shen, Jiajia
Published: (2024)

Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties
by: Oliveira, J. P.
Published: (2019)

Fully coupled thermomechanical analysis of multilayered plates with embedded FGM skins or core layers using a layerwise mixed model
by: Moleiro, F.
Published: (2019)

Design of magnetic kappa-carrageenan-collagen bioinks for 3D bioprinting
by: Almeida, Duarte
Published: (2024)

Effects of thermocycling on mechanical properties of soft lining materials.
by: Goiato, Marcelo Coelho
Published: (2014)

Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy
by: Oliveira, J. P.
Published: (2020)

Role of TiB2 inoculation particles during welding of a AlCoCrFeNi high entropy alloy
by: Lopes, J. G.
Published: (2024)

Mechanical properties of natural cellular materials
by: Tchepel, D.
Published: (2016)

Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy
by: Oliveira, João Pedro
Published: (2021)

Postsynthetic treatment of nickel–iron layered double hydroxides for the optimum catalysis of the oxygen evolution reaction
by: Tyndall, Daire
Published: (2021)

Junction engineering in solution-processed nanosheet networks
by: Kelly, Adam G.
Published: (2025)

Characterization of AuNPs+rGO as a functionalized layer for LSPR sensors
by: Fantoni, Alessandro
Published: (2020)

Toposelective Functionalization of Solution-Processed Transition Metal Dichalcogenides with Metal Nanoparticles via Defect Engineering
by: Ippolito, Stefano
Published: (2025)

Smart piezoelectric composite
by: Ferreira, Pedro M.
Published: (2024)

Numerical-experimental plastic-damage characterisation of additively manufactured 18ni300 maraging steel by means of multiaxial double-notched specimens
by: Silva, Tiago E. F.
Published: (2021)

Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis
by: Bevans, Benjamin
Published: (2023)

Funded activities

No funded projects found.