Publicação
Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control
| Resumo: | Dielectric barrier discharge (DBD) plasma actuators are simple electrohydrodynamic devices, which are able to provide effective aerodynamic control. One of the main components of these devices is the thin dielectric layer, which allows to separate and prevent the arc between the high voltage electrodes. Different materials can be used as dielectric layer to reduce the power consumption or boost the flow controlling effect of the actuators. In this context, this report presents a comparative study of two commercial polyimides, Kapton and Cirlex, used as dielectric layer of surface DBD plasma actuators. The electrical, dielectric, mechanical, electromechanical and thermal properties were obtained to evaluate overall performance. It was verified that Cirlex (8.3 W) consumes less power than Kapton (21.3 W) to generate higher induced flow velocity of ≈3.4 m/s for an input voltage of 11 kVpp and 24 kHz. During one AC cycle at 11 kVpp the charge transferred for Cirlex (70 nC) is lower than for Kapton (100 nC), as well as the dielectric breakdown voltage to ignite the plasma discharge, 1.5 and 2.2 kVpp, respectively. The Cirlex DBD presents a higher voltage operation limit (at least 14 kVpp) and a more regular plasma discharge, which results in a more homogenous thermal profile and temperature distribution during its operation. The Cirlex actuator delivered higher mechanical power (6.2 mW) and achieved higher electromechanical efficiency (0.004%). The polyimide Cirlex proved to be a suitable alternative for Kapton to fabricate DBD plasma actuators for flow control with improved performance. |
|---|---|
| Autores principais: | Nunes-Pereira, E. J. |
| Outros Autores: | Rodrigues, F. F.; Abdollahzadeh, M.; Páscoa, J. C.,; Lanceros-Méndez, S. |
| Assunto: | Dielectric barrier discharge plasma actuators Polyimides Cirlex Kapton Flow control |
| Ano: | 2022 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control
por: Nunes-Pereira, João
Publicado em: (2021)
por: Nunes-Pereira, João
Publicado em: (2021)
article Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation
por: Rodrigues, Frederico Miguel Freire
Publicado em: (2022)
por: Rodrigues, Frederico Miguel Freire
Publicado em: (2022)
article Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications
por: Rodrigues, Frederico
Publicado em: (2024)
por: Rodrigues, Frederico
Publicado em: (2024)
article Effect of Dielectric Barrier Discharge on the Airflow Around a Cylinder
por: Droubi,Ashraf El
Publicado em: (2012)
por: Droubi,Ashraf El
Publicado em: (2012)
groups Dielectric barrier discharge plasma actuators based on thermosetting composites for flow control in wind turbines blades
por: Nunes-Pereira, João
Publicado em: (2023)
por: Nunes-Pereira, João
Publicado em: (2023)
article Thin Film Deposition by Atmospheric Pressure Dielectric Barrier Discharges Containing Eugenol: Discharge and Coating Characterizations
por: Getnet, Tsegaye Gashaw
Publicado em: (2021)
por: Getnet, Tsegaye Gashaw
Publicado em: (2021)
article Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators
por: Moreira, Miguel
Publicado em: (2023)
por: Moreira, Miguel
Publicado em: (2023)
article Implementation of the classical plasma–fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM
por: Abdollahzadehsangroudi, Mohammadmahdi
Publicado em: (2016)
por: Abdollahzadehsangroudi, Mohammadmahdi
Publicado em: (2016)
groups Comparative Evaluation of Dielectric Materials for Plasma Actuators Active Flow Control and Heat Transfer Applications
por: Rodrigues, Frederico
Publicado em: (2021)
por: Rodrigues, Frederico
Publicado em: (2021)
article The role of vibrational temperature variations in a pulsed dielectric barrier discharge plasma device
por: Nascimento, Fellype do, 1980-
Publicado em: (2020)
por: Nascimento, Fellype do, 1980-
Publicado em: (2020)
article Changes in properties of dielectric barrier discharge plasma jets for different gases and for insulating and conducting transfer plates
por: Nascimento, Fellype do, 1980-
Publicado em: (2017)
por: Nascimento, Fellype do, 1980-
Publicado em: (2017)
article Plasma Treatment of Polyamide Fabric Surface by Hybrid Corona-Dielectric Barrier Discharge: Material Characterization and Dyeing/Washing Processes
por: Gasi,Fernando
Publicado em: (2020)
por: Gasi,Fernando
Publicado em: (2020)
article Plasma treatment of polyamide fabric surface by hybrid corona-dielectric barrier discharge: Material characterization and dyeing/washing processes
por: Gasi, Fernando
Publicado em: (2020)
por: Gasi, Fernando
Publicado em: (2020)
article Effect of particle size on silver nanoparticle deposition onto dielectric barrier discharge (DBD) plasma functionalized polyamide fabric
por: Vu, Nguyen Khanh
Publicado em: (2013)
por: Vu, Nguyen Khanh
Publicado em: (2013)
article Dielectric relaxation dynamics of high-temperature piezoelectric polyimide copolymers
por: Maceiras, A.
Publicado em: (2015)
por: Maceiras, A.
Publicado em: (2015)
article Experimental study of low-pressure nitrogen dielectric barrier discharge
por: Khatun,Hasina
Publicado em: (2010)
por: Khatun,Hasina
Publicado em: (2010)
article An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
por: Vidal,Dielly Cavalcanti da Silva Monte
Publicado em: (2018)
por: Vidal,Dielly Cavalcanti da Silva Monte
Publicado em: (2018)
article An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
por: Silva Monte Vidal, Dielly Cavalcanti da
Publicado em: (2018)
por: Silva Monte Vidal, Dielly Cavalcanti da
Publicado em: (2018)
article Biofunctional coating of stainless steel surfaces with carvacrol- and eugenol-derived film using atmospheric dielectric barrier discharge plasma: aiming for suppression of biofilm formation and corrosion protection
por: Getnet, Tsegaye Gashaw
Publicado em: (2023)
por: Getnet, Tsegaye Gashaw
Publicado em: (2023)
article Reuse of effluent from dyeing process of polyamide fibers modified by double barrier discharge (DBD) plasma
por: Oliveira, Fernando Ribeiro
Publicado em: (2016)
por: Oliveira, Fernando Ribeiro
Publicado em: (2016)
article Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application
por: Abdollahzadehsangroudi, Mohammadmahdi
Publicado em: (2022)
por: Abdollahzadehsangroudi, Mohammadmahdi
Publicado em: (2022)
article Dyeing mechanism and optimization of polyamide 6,6 functionalized with double barrier discharge (DBD) plasma in air
por: Oliveira, Fernando
Publicado em: (2014)
por: Oliveira, Fernando
Publicado em: (2014)
article Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators
por: Shvydyuk, Kateryna
Publicado em: (2023)
por: Shvydyuk, Kateryna
Publicado em: (2023)
school Design and Characterization of Paper-based Plasma Generators for Sterilization
por: Tavares, Maria Francisca Pires da Silva Carvalhão
Publicado em: (2021)
por: Tavares, Maria Francisca Pires da Silva Carvalhão
Publicado em: (2021)
school Estudo de polímeros comerciais tratados a plasma em pressão atmosférica
por: Santos, Alessandro Luiz Ribeiro dos
Publicado em: (2014)
por: Santos, Alessandro Luiz Ribeiro dos
Publicado em: (2014)
article Properties of DBD plasma jets using powered electrode with and without contact with the plasma
por: Machida, Munemasa, 1950-
Publicado em: (2021)
por: Machida, Munemasa, 1950-
Publicado em: (2021)
article Atmospheric pressure plasma deposition of eugenol-derived film on metallic biomaterial for suppression of Escherichia coli and Staphylococcus aureus bacterial biofilm
por: Getnet, Tsegaye Gashaw
Publicado em: (2022)
por: Getnet, Tsegaye Gashaw
Publicado em: (2022)
article Atmospheric Pressure Plasma Chemical Vapor Deposition of Carvacrol Thin Films on Stainless Steel to Reduce the Formation ofE. ColiandS. AureusBiofilms
por: Getnet, Tsegaye Gashaw
Publicado em: (2020)
por: Getnet, Tsegaye Gashaw
Publicado em: (2020)
school Plasma Sanitizers on Flexible Substrates
por: Sousa, Inês Gaspar Melo e Castro Costa de
Publicado em: (2021)
por: Sousa, Inês Gaspar Melo e Castro Costa de
Publicado em: (2021)
article Antimicrobial efficacy of low concentration PVP-silver nanoparticles deposited on DBD Plasma-Treated polyamide 6,6 fabric
por: Silva, Késia Karina de Oliveira Souto
Publicado em: (2021)
por: Silva, Késia Karina de Oliveira Souto
Publicado em: (2021)
article Properties of DBD Plasma Jets Using Powered Electrode with and without Contact with the Plasma
por: Nascimento, Fellype do[UNESP]
Publicado em: (2021)
por: Nascimento, Fellype do[UNESP]
Publicado em: (2021)
article Surface modification of banana fibers by DBD plasma treatment
por: Oliveira, F. R.
Publicado em: (2012)
por: Oliveira, F. R.
Publicado em: (2012)
article Three cell flying capacitor inverter for dielectric barrier discharge plasma applications
por: Flores-Fuentes,A.
Publicado em: (2009)
por: Flores-Fuentes,A.
Publicado em: (2009)
article Characteristics of dielectric barrier discharge reactor for material treatment
por: Kostov,K.G.
Publicado em: (2009)
por: Kostov,K.G.
Publicado em: (2009)
article Characteristics of Dielectric Barrier Discharge Reactor for Material Treatment
por: Kostov, K. G.
Publicado em: (2014)
por: Kostov, K. G.
Publicado em: (2014)
article Characteristics of dielectric barrier discharge reactor for material treatment
por: Kostov, K. G.
Publicado em: (2022)
por: Kostov, K. G.
Publicado em: (2022)
school Implementation of a Dielectric Elastomer Actuator (DEA) for robotics application
por: Rocha, Pedro Miguel Sá Marques
Publicado em: (2017)
por: Rocha, Pedro Miguel Sá Marques
Publicado em: (2017)
school Atmospheric Plasma Treatment of Biomaterials with Eugenol and Carvacrol Thin Films for Inhibiting Bacterial Adhesion and Proliferation
por: Getnet, Tsegaye Gashaw
Publicado em: (2020)
por: Getnet, Tsegaye Gashaw
Publicado em: (2020)
school Construção de recirculador de gases para utilização junto a um reator de plasma DBD
por: Saldanha, Elias Francisco Oliveira
Publicado em: (2018)
por: Saldanha, Elias Francisco Oliveira
Publicado em: (2018)
article Synthesis and properties of fluorinated copolymerized polyimide films
por: Cao,Chuanhao
Publicado em: (2020)
por: Cao,Chuanhao
Publicado em: (2020)
Atividades financiadas
Não foram encontrados projetos financiados.
Registos relacionados
-
article Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control
por: Nunes-Pereira, João
Publicado em: (2021) -
article Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation
por: Rodrigues, Frederico Miguel Freire
Publicado em: (2022) -
article Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications
por: Rodrigues, Frederico
Publicado em: (2024) -
article Effect of Dielectric Barrier Discharge on the Airflow Around a Cylinder
por: Droubi,Ashraf El
Publicado em: (2012) -
groups Dielectric barrier discharge plasma actuators based on thermosetting composites for flow control in wind turbines blades
por: Nunes-Pereira, João
Publicado em: (2023)