Publicação
Cytocompatible scaffolds of poly(L-lactide)/reduced graphene oxide for tissue engineering
| Resumo: | Poly(L-lactide)/reduced graphene oxide (PLLA/rGO) scaffolds were studied in the present work. The scaffolds were fabricated by TIPS (thermally induced phase separation). Nonisothermal crystallization study for PLLA/rGO was investigated and revealed the nucleating effect of rGO. rGO effect on cytotoxicity, thermal properties, and hydrolysis resistance of PLLA and PLLA/rGO scaffolds were analysed. In vitro degradation in phosphate-buffered solution at 37 degrees C is analyzed over twelve weeks. A high crystalline behaviour reduces the speed of hydrolysis and therefore implies less variation in pH, mass loss and water up take. The rGO does not seem to accelerate the degradation process. Finally, rGO contents in PLLA up to 1 wt% dos not lead to cytotoxic effect, the scaffolds supporting cell adhesion and proliferation. |
|---|---|
| Autores principais: | Díaz, E. |
| Outros Autores: | Iglesias, N.; Ribeiro, Sylvie Oliveira; Lanceros-Méndez, S. |
| Assunto: | PLLA rGO hydrolysis cytocompatible bone regeneration |
| Ano: | 2021 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Cytocompatible and biodegradable poly(D,L-lactide-coglycolide)/reduced graphene oxide scaffolds
por: Díaz, Esperanza
Publicado em: (2023)
por: Díaz, Esperanza
Publicado em: (2023)
article In vitro and in vivo characterization of PLLA-316L stainless steel electromechanical devices for bone tissue engineering—A preliminary study
por: Branquinho, MV
Publicado em: (2021)
por: Branquinho, MV
Publicado em: (2021)
article Influence of rGO on the cristallization kinetics, cytoxicity, electrical and mechanical properties of PLCL scaffolds
por: Díaz, Esperanza
Publicado em: (2022)
por: Díaz, Esperanza
Publicado em: (2022)
article Toxicity and possibly Reduced Graphene Oxide cellular interaction with Raphidoceles subcapitata: Ultrastructural analysis
por: Irazusta, Silvia Pierre
Publicado em: (2021)
por: Irazusta, Silvia Pierre
Publicado em: (2021)
article Plasmonic properties of gold nanospheres coupled to reduced graphene oxide for biosensing applications
por: Fantoni, Alessandro
Publicado em: (2019)
por: Fantoni, Alessandro
Publicado em: (2019)
article Polyaniline—Graphene Electrodes Prepared by Electropolymerization for High-Performance Capacitive Electrodes: A Brief Review
por: Okhay, Olena
Publicado em: (2022)
por: Okhay, Olena
Publicado em: (2022)
article CARACTERIZAÇÃO E AVALIAÇÃO IN VITRO DE NANOCOMPÓSITOS DE POLI (L-ÁCIDO LÁTICO) E NANOTUBOS DE CARBONO DE PAREDES MÚLTIPLAS PURIFICADOS
por: Leal,Claudenete Vieira
Publicado em: (2015)
por: Leal,Claudenete Vieira
Publicado em: (2015)
article Layer-by-layer assembly of functionalized reduced graphene oxide for direct electrochemistry and glucose detection
por: Mascagni, Daniela Branco Tavares
Publicado em: (2018)
por: Mascagni, Daniela Branco Tavares
Publicado em: (2018)
groups In vitro cytocompatibility evaluation of poly(DL-lactic acid) scaffolds loaded with minocycline and voriconazole addressing osteomyelitis
por: Zegre, Miguel
Publicado em: (2021)
por: Zegre, Miguel
Publicado em: (2021)
article A strategy towards melanin-based functional material: rGO and sulfonated melanin composites
por: Bregadiolli, Bruna Andressa
Publicado em: (2021)
por: Bregadiolli, Bruna Andressa
Publicado em: (2021)
school SÍNTESE E CARACTERIZAÇÃO DE NANOPARTÍCULAS DE PLATINA E DE ÓXIDO DE GRAFENO REDUZIDO PARA INCORPORAÇÃO EM DISPOSITIVOS POLIMÉRICOS PARA TAMPÕES CIRÚRGICOS
por: Pinheiro, Lailla Daianna Soltau Missio
Publicado em: (2019)
por: Pinheiro, Lailla Daianna Soltau Missio
Publicado em: (2019)
article Tailoring morphology and crystallinity of poly(L-lactide acid) electrospun membranes
por: Ribeiro, C.
Publicado em: (2011)
por: Ribeiro, C.
Publicado em: (2011)
groups Characterization of plasmonic effects in AuNP+rGO composite as a sensing layer for a low-cost lab-on-chip biosensor
por: Fantoni, Alessandro
Publicado em: (2019)
por: Fantoni, Alessandro
Publicado em: (2019)
article A new approach for the fabrication of cytocompatible PLLA-magnetite nanoparticle composite scaffolds
por: Díaz, E.
Publicado em: (2019)
por: Díaz, E.
Publicado em: (2019)
groups In vitro cytocompatibility evaluation of poly(DL-lactic acid) scaffolds loaded with minocycline and voriconazole addressing osteomyelitis
por: Zegre, Miguel
Publicado em: (2021)
por: Zegre, Miguel
Publicado em: (2021)
article Simple and Fast Approach for Synthesis of Reduced Graphene Oxide-MoS(2 )Hybrids for Room Temperature Gas Detection
por: Kumar, Rajesh
Publicado em: (2018)
por: Kumar, Rajesh
Publicado em: (2018)
school Obtenção de grafeno por esfoliação eletroquímica
por: Silva, Ederson Esteves da
Publicado em: (2016)
por: Silva, Ederson Esteves da
Publicado em: (2016)
school Advanced electromechanical devices for use in tissue engineering: applications in hard tissues
por: Rocha, Júlio Rafael Henriques
Publicado em: (2021)
por: Rocha, Júlio Rafael Henriques
Publicado em: (2021)
article Investigation of polymer-based BaO and rGO nanocomposites for application in low energy X ray attenuation
por: Liliane Aparecida Silva
Publicado em: (2023)
por: Liliane Aparecida Silva
Publicado em: (2023)
article Interface matters: Design of an efficient CaCu3Ti4O12-rGO photocatalyst
por: Praxedes, F. M.
Publicado em: (2023)
por: Praxedes, F. M.
Publicado em: (2023)
school Síntese, caracterização e aplicação do alfa-hidróxido de níquel associado a óxido de grafeno reduzido como sensor voltamétrico
por: Silva, Aleckson Souto
Publicado em: (2018)
por: Silva, Aleckson Souto
Publicado em: (2018)
article 3D printed poly(E-caprolactone)/Hydroxyapatite scaffolds for bone tissue engineering: A comparative study on a Composite Preparation by Melt blending or solvent casting techniques and the influence of bioceramic content on scaffold properties
por: Biscaia, Sara
Publicado em: (2022)
por: Biscaia, Sara
Publicado em: (2022)
article 3D printed Poly(ε-caprolactone)/Hydroxyapatite scaffolds for bone tissue engineering: a comparative study on a composite preparation by melt blending or solvent casting techniques and the influence of bioceramic content on scaffold properties
por: Biscaia, Sara
Publicado em: (2022)
por: Biscaia, Sara
Publicado em: (2022)
school Electrical and biological characterization of PLLA-316L stainless steel electromechanical devices for bone tissue engineering
por: Ferreira, Sheila de Oliveira
Publicado em: (2021)
por: Ferreira, Sheila de Oliveira
Publicado em: (2021)
article Double-walled poly-(D,l-lactide-co-glycolide) (plga) and poly(l-lactide) (plla) nanoparticles for the sustained release of doxorubicin
por: Cardoso, M. Margarida
Publicado em: (2021)
por: Cardoso, M. Margarida
Publicado em: (2021)
article Cytocompatibility evaluation of hydroxyapatite/collagen composites doped with Zn+2
por: Santos,Maria Helena
Publicado em: (2007)
por: Santos,Maria Helena
Publicado em: (2007)
article Preparation of porous poly (lactic acid) fibers by medium field electrospinning for tissue engineering applications
por: Santos,André Luiz dos
Publicado em: (2020)
por: Santos,André Luiz dos
Publicado em: (2020)
article Photocatalytic degradation of organic pollutant using TiO2/rGO nanocomposites under simulated sunlight
por: Kocijan, Martina
Publicado em: (2020)
por: Kocijan, Martina
Publicado em: (2020)
article Cytocompatibility, biofilm assembly and corrosion behavior of Mg-HAP composites processed by extrusion
por: Del Campo, Ruben
Publicado em: (2017)
por: Del Campo, Ruben
Publicado em: (2017)
article Characterization and in vitro cytocompatibility of an acid-etched titanium surface
por: Carvalho,Daniel Rey de
Publicado em: (2010)
por: Carvalho,Daniel Rey de
Publicado em: (2010)
article Production and Characterisation of PCL/ES Scaffolds for Bone Tissue Engineering
por: Biscaia, Sara I.
Publicado em: (2015)
por: Biscaia, Sara I.
Publicado em: (2015)
article Preparation of starch-based scaffolds for tissue engineering by supercritical immersion precipitation
por: Duarte, Ana Rita C.
Publicado em: (2009)
por: Duarte, Ana Rita C.
Publicado em: (2009)
article Processing of novel bioactive polymeric matrixes for tissue engineering using supercritical fluid technology
por: Duarte, Ana Rita C.
Publicado em: (2009)
por: Duarte, Ana Rita C.
Publicado em: (2009)
article Development of porous lamellar poly(L-lactic acid) scaffolds by conventional injection molding process
por: Ghosh, Satyabrata
Publicado em: (2008)
por: Ghosh, Satyabrata
Publicado em: (2008)
article Enzymatic degradation behavior and cytocompatibility of silk fibroin–starch–chitosan conjugate membranes
por: Baran, E. T.
Publicado em: (2012)
por: Baran, E. T.
Publicado em: (2012)
school Mechanical stimulus responsive 3D-Bio based graphene scaffolds for bone tissue engineering
por: Carvalho, Sara Diana Gomes
Publicado em: (2021)
por: Carvalho, Sara Diana Gomes
Publicado em: (2021)
school Desenvolvimento e aplicação de arranjos de nanossensores baseados em óxido de grafeno reduzido e nanopartículas de ouro para determinação eletroquímica de hidrazina
por: Higino, Giane Silva
Publicado em: (2020)
por: Higino, Giane Silva
Publicado em: (2020)
book Silk Fibroin-Based Scaffold for Bone Tissue Engineering
por: Choi, J. H.
Publicado em: (2018)
por: Choi, J. H.
Publicado em: (2018)
article Exploring the gelation mechanisms and cytocompatibility of gold (III)-mediated regenerated and thiolated silk fibroin hydrogels
por: Laomeephol, Chavee
Publicado em: (2020)
por: Laomeephol, Chavee
Publicado em: (2020)
article Reinforcement of poly-L-lactic acid electrospun membranes with strontium borosilicate bioactive glasses for bone tissue engineering
por: Fernandes, João S.
Publicado em: (2016)
por: Fernandes, João S.
Publicado em: (2016)
Atividades financiadas
Não foram encontrados projetos financiados.
Registos relacionados
-
article Cytocompatible and biodegradable poly(D,L-lactide-coglycolide)/reduced graphene oxide scaffolds
por: Díaz, Esperanza
Publicado em: (2023) -
article In vitro and in vivo characterization of PLLA-316L stainless steel electromechanical devices for bone tissue engineering—A preliminary study
por: Branquinho, MV
Publicado em: (2021) -
article Influence of rGO on the cristallization kinetics, cytoxicity, electrical and mechanical properties of PLCL scaffolds
por: Díaz, Esperanza
Publicado em: (2022) -
article Toxicity and possibly Reduced Graphene Oxide cellular interaction with Raphidoceles subcapitata: Ultrastructural analysis
por: Irazusta, Silvia Pierre
Publicado em: (2021) -
article Plasmonic properties of gold nanospheres coupled to reduced graphene oxide for biosensing applications
por: Fantoni, Alessandro
Publicado em: (2019)