Publicação
Study of thermal and mechanical properties of a biocomposite based on natural rubber and 45S5 Bioglass® particles
| Resumo: | Biocomposites based on natural rubber (NR) reinforced with 45S5 Bioglass® (BG) particles were obtained by casting/evaporation method in which NR was dissolved in chloroform and mixed with BG particles. Structural, mechanical, and thermal tests were performed on the biocomposites to evaluate the influence of BG particles on the properties of the NR matrix. Thermogravimetric tests (TG/DTG) of the biocomposites showed decomposition profiles similar to that of NR, and the main peak of the DTG curve was well defined in the temperature range 300–450 °C, characteristic of the structural degradation of NR. The TG analysis also revealed that the thermal stability of the samples increases with the increasing quantity of BG in the biocomposite. DMA tests showed higher storage modulus (E′) values for samples with larger amounts of BG; however, above the Tg, the E′ value tended to zero due to the increased mobility of the polymer chains. By analyzing tan δ, the Tg values were calculated to be −46 and −50 °C for NR and the biocomposite samples, respectively. Mechanical testing demonstrated that the addition of BG to the biocomposite improved the mechanical properties of the samples. The samples became more rigid with the increasing quantity of BG, as demonstrated by decreasing deformation and the increasing elastic modulus (Y) and breaking strength of the samples. The BG particles positively affected the mechanical and thermal properties of the biocomposite, allowing its use in biomedical applications. |
|---|---|
| Autores principais: | Silva, M. J. |
| Outros Autores: | Soares, V. O.; Dias, G. C.; Santos, R. J.; Job, A. E.; Sanches, A. O.; Malmonge, J. A. |
| Assunto: | Biocomposite Bioglass® Mechanical analysis Natural rubber Thermal analysis |
| Ano: | 2018 |
| País: | Brasil |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | IBICT |
| Idioma: | inglês |
| Origem: | Oasisbr |
Registos relacionados
article Evaluation of tensile, thermal, and biological properties of natural rubber-based biocomposite with biosilicate and 45S5-K bioglass
por: Lima, Luiz R. M.
Publicado em: (2023)
por: Lima, Luiz R. M.
Publicado em: (2023)
article Mechanical, thermal, and morphological properties of natural rubber/45S5 Bioglass® fibrous mat with ribbon-like morphology produced by solution blow spinning
por: Sousa, Eliraldrin Amorin
Publicado em: (2019)
por: Sousa, Eliraldrin Amorin
Publicado em: (2019)
article Cork–polymer biocomposites: mechanical, structural and thermal properties
por: Fernandes, E. M.
Publicado em: (2015)
por: Fernandes, E. M.
Publicado em: (2015)
article Mechanical properties, morphology and thermal degradation of a biocomposite of polypropylene and curaua fibers: coupling agent effect
por: Mano,Barbara
Publicado em: (2013)
por: Mano,Barbara
Publicado em: (2013)
article Effect of fiber treatments on tensile and thermal properties of starch/ethylene vinyl alcohol copolymers/coir biocomposites.
por: ROSA, M. de F.
Publicado em: (2011)
por: ROSA, M. de F.
Publicado em: (2011)
article Mechanical Properties Analysis of Polypropylene Biocomposites Reinforced with Curaua Fiber
por: Bispo,Sistanley Jones Lima
Publicado em: (2015)
por: Bispo,Sistanley Jones Lima
Publicado em: (2015)
article Study on mechanical & thermal properties of PCL blended graphene biocomposites
por: Kumar,Dinesh
Publicado em: (2019)
por: Kumar,Dinesh
Publicado em: (2019)
article Manufacturing, Mechanical and Morphological Characterization of new Natural Hybrid Biocomposite Materials of Fique – Mulberry
por: Suárez,Sergio Gómez
Publicado em: (2022)
por: Suárez,Sergio Gómez
Publicado em: (2022)
article Biocomposites reinforced with natural fibers:thermal, morphological and mechanical characterization
por: Lemos,Alessandra Luiza de
Publicado em: (2017)
por: Lemos,Alessandra Luiza de
Publicado em: (2017)
article Structural investigation of the surface of bioglass 45S5 enriched with calcium ions
por: Landers, Richard, 1946-
Publicado em: (2013)
por: Landers, Richard, 1946-
Publicado em: (2013)
article Microstructural, mechanical and biological properties of hydroxyapatite - CaZrO3 biocomposites
por: Vassal, Mariana
Publicado em: (2019)
por: Vassal, Mariana
Publicado em: (2019)
article Thermal characterization and lifetime prediction of the PHBV/nanocellulose biocomposites using different kinetic approaches
por: Carvalho Benini, Kelly Cristina Coelho de
Publicado em: (2020)
por: Carvalho Benini, Kelly Cristina Coelho de
Publicado em: (2020)
article Comparsion of flexural properties of biocomposites and plaster board panels
por: Patinha, S.
Publicado em: (2013)
por: Patinha, S.
Publicado em: (2013)
article Structural, crystallization and cytocompatibility evaluation of the 45S5 bioglass-derived glass-ceramic containing niobium
por: Siqueira, Lilian de
Publicado em: (2021)
por: Siqueira, Lilian de
Publicado em: (2021)
book Biocomposites and bioceramics in tissue engineering: beyond the next decade
por: Pina, Sandra Cristina Almeida
Publicado em: (2022)
por: Pina, Sandra Cristina Almeida
Publicado em: (2022)
article Hierarchical structures of β-TCP/45S5 bioglass hybrid scaffolds prepared by gelcasting
por: Lopes, João Henrique
Publicado em: (2018)
por: Lopes, João Henrique
Publicado em: (2018)
article Acai Residue as an Ecologic Filler to Reinforcement of Natural Rubber Biocomposites
por: Araújo, Samara S.
Publicado em: (2023)
por: Araújo, Samara S.
Publicado em: (2023)
article Effects of Multiple Extrusions on Structure-property Performance of Natural Fiber High-density Polyethylene Biocomposites
por: Nadali,Elham
Publicado em: (2018)
por: Nadali,Elham
Publicado em: (2018)
article Optimal Tensile Properties of Biocomposites Made of Treated Amazonian Curauá Fibres Using Taguchi Method
por: Pino,Gilberto García del
Publicado em: (2021)
por: Pino,Gilberto García del
Publicado em: (2021)
article Influence of the addition of zinc, strontium, or magnesium oxides to the Bioglass 45S5 network on electrical behavior
por: Gavinho, Sílvia Rodrigues
Publicado em: (2024)
por: Gavinho, Sílvia Rodrigues
Publicado em: (2024)
article Exploring the Impact of Copper Oxide Substitution on Structure, Morphology, Bioactivity, and Electrical Properties of 45S5 Bioglass®
por: Hammami, Imen
Publicado em: (2024)
por: Hammami, Imen
Publicado em: (2024)
article 45S5 Bioglass-Derived Glass-Ceramic Scaffolds Containing Niobium Obtained by Gelcasting Method
por: Siqueira,Lilian de
Publicado em: (2021)
por: Siqueira,Lilian de
Publicado em: (2021)
article 45S5 bioglass-derived glass-ceramic scaffolds containing niobium obtained by gelcasting method
por: Siqueira, L
Publicado em: (2021)
por: Siqueira, L
Publicado em: (2021)
article Effects of polypropylene methyl polyhedral oligomeric silsesquioxanes and polypropylene-grafted maleic anhydride compatibilizers on the properties of palm kernel shell reinforced polypropylene biocomposites
por: Mohaiyiddin,Muhammad Safwan
Publicado em: (2016)
por: Mohaiyiddin,Muhammad Safwan
Publicado em: (2016)
article Thermo-mechanical analysis of mass concrete elements made of rubberized concrete
por: ALBUQUERQUE,A. C.
Publicado em: (2019)
por: ALBUQUERQUE,A. C.
Publicado em: (2019)
article Y-PSZ/Bioglass 45S5 composite obtained by the infiltration technique of porous pre-sintered bodies using sacrificial molding
por: Luzo, Raphael de Oliveira
Publicado em: (2021)
por: Luzo, Raphael de Oliveira
Publicado em: (2021)
article Incorporation of 45S5 bioglass via sol-gel in β-TCP scaffolds: Bioactivity and antimicrobial activity evaluation
por: Spirandeli, B. R.
Publicado em: (2022)
por: Spirandeli, B. R.
Publicado em: (2022)
article Asymmetric PDLLA membranes containing Bioglass® for guided tissue regeneration : characterization and in-vitro biological behavior
por: Leal, Ana Isabel
Publicado em: (2013)
por: Leal, Ana Isabel
Publicado em: (2013)
school Study on production methods of Bioglass Porous Structures for Bone Tissue Engineering
por: Carmo, Francisco Luís Araújo do
Publicado em: (2018)
por: Carmo, Francisco Luís Araújo do
Publicado em: (2018)
article Preparation and characterization of stainless steel 316L/HA biocomposite
por: Silva,Gilbert
Publicado em: (2013)
por: Silva,Gilbert
Publicado em: (2013)
article Influence of the Particle Size on the Electrical, Magnetic and Biological Properties of the Bioglass® Containing Iron Oxide
por: Regadas, Joana Soares
Publicado em: (2023)
por: Regadas, Joana Soares
Publicado em: (2023)
article In situ study of partially crystallized bioglass (R) and hydroxylapatite in vitro bioactivity using atomic force microscopy
por: Leonor, I. B.
Publicado em: (2002)
por: Leonor, I. B.
Publicado em: (2002)
article Porous Bioglass Scaffold for Orthopedics Applications
por: Soares, Stéphanie
Publicado em: (2016)
por: Soares, Stéphanie
Publicado em: (2016)
article Influence of Encapsulated Nanodiamond Dispersion on P(3HB) Biocomposites Properties
por: Almeida Neto,Gabriel Rodrigues de
Publicado em: (2017)
por: Almeida Neto,Gabriel Rodrigues de
Publicado em: (2017)
article Influence of the Addition of Zinc, Strontium, or Magnesium Oxides to the Bioglass 45S5 Network on Electrical Behavior
por: Gavinho, Sílvia Rodrigues
Publicado em: (2024)
por: Gavinho, Sílvia Rodrigues
Publicado em: (2024)
article Influence of grape and acerola residues on the antioxidant, physicochemical and mechanical properties of cassava starch biocomposites
por: Ito, Edson Noriyuki
Publicado em: (2021)
por: Ito, Edson Noriyuki
Publicado em: (2021)
article Pullulan–Apple Fiber Biocomposite Films: Optical, Mechanical, Barrier, Antioxidant and Antibacterial Properties
por: Luís, Ângelo
Publicado em: (2021)
por: Luís, Ângelo
Publicado em: (2021)
article The influence of cork and manufacturing parameters on the properties of cork–rubber composites for vibration isolation applications
por: Lopes, Helena
Publicado em: (2021)
por: Lopes, Helena
Publicado em: (2021)
article Styrene–butadiene rubber/cellulose II/clay nanocomposites prepared by cocoagulation—mechanical properties
por: Ito, Edson Noriyuki
Publicado em: (2021)
por: Ito, Edson Noriyuki
Publicado em: (2021)
article Influence of crumb rubber gradation on asphalt-rubber properties
por: Neto, Silvrano Adonias Dantas
Publicado em: (2006)
por: Neto, Silvrano Adonias Dantas
Publicado em: (2006)
Atividades financiadas
Não foram encontrados projetos financiados.
Registos relacionados
-
article Evaluation of tensile, thermal, and biological properties of natural rubber-based biocomposite with biosilicate and 45S5-K bioglass
por: Lima, Luiz R. M.
Publicado em: (2023) -
article Mechanical, thermal, and morphological properties of natural rubber/45S5 Bioglass® fibrous mat with ribbon-like morphology produced by solution blow spinning
por: Sousa, Eliraldrin Amorin
Publicado em: (2019) -
article Cork–polymer biocomposites: mechanical, structural and thermal properties
por: Fernandes, E. M.
Publicado em: (2015) -
article Mechanical properties, morphology and thermal degradation of a biocomposite of polypropylene and curaua fibers: coupling agent effect
por: Mano,Barbara
Publicado em: (2013) -
article Effect of fiber treatments on tensile and thermal properties of starch/ethylene vinyl alcohol copolymers/coir biocomposites.
por: ROSA, M. de F.
Publicado em: (2011)