Publicação
Preparation and biocompatibility of poly (methyl methacrylate) reinforced with bioactive particles
| Resumo: | Calcium phosphates and bioactive glasses have been used in many biomedical applications for more than 30 years due basically to their bioactive behavior. However, ceramics are too brittle for applications that require high levels of toughness and easy processability. In this work, a biphasic calcium phosphate (BCP) and a bioactive glass composition (BG) were combined with polymers to produce composites with tailorable properties and processability. The BCP particles were synthesized by a precipitation technique. The BG particles were produced by sol-gel processing. The BCP particles were treated with a silane agent to improve the compatibility between particles and the polymer matrix. Dense samples were produced by hot pressing (200 °C) a mixture of 30 wt.% of particles in poly (methyl methacrylate). The samples produced were characterized by X-ray diffraction, infrared spectroscopy and scanning electron microscopy. Mechanical properties were evaluated by a three point bending test. Samples were also submitted to in vitro bioactivity test and in vivo toxicity test. Results showed that the production of the composites was successfully achieved, yielding materials with particles well dispersed within the matrices. Evaluation of the in vivo inflammatory response showed low activity levels for all composites although composites with silane treated BCP particles led to milder inflammatory responses than composites with non-treated particles. |
|---|---|
| Autores principais: | Pereira,Marivalda de Magalhães |
| Outros Autores: | Oréfice,Rodrigo Lambert; Mansur,Herman Sander; Lopes,Miriam Teresa Paz; Turchetti-Maia,Regina Maria De Marco; Vasconcelos,Anilton Cesar |
| Assunto: | biomaterials composites poly(methyl methacrylate) bioactive glass calcium phosphate |
| Ano: | 2003 |
| País: | Brasil |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | IBICT |
| Idioma: | inglês |
| Origem: | Oasisbr |
Registos relacionados
article Poly (Methyl Methacrylate)-SiC Nanocomposites Prepared Through in Situ Polymerization
por: Tommasini,Flávio James
Publicado em: (2018)
por: Tommasini,Flávio James
Publicado em: (2018)
article Thermal properties of poly (methyl methacrylate)/organomodified montmorillonite nanocomposites obtained by in situ photopolymerization
por: Valandro,Silvano Rodrigo
Publicado em: (2014)
por: Valandro,Silvano Rodrigo
Publicado em: (2014)
article Evaluation of magnetic poly(methyl methacrylate) microspheres as catalysts in heterogeneous Fenton processes
por: Silva,Alan Kardec da
Publicado em: (2022)
por: Silva,Alan Kardec da
Publicado em: (2022)
article Rheological and mechanical characterization of poly (methyl methacrylate)/silica (PMMA/SiO2) composites
por: Silva,Erik dos Santos
Publicado em: (2014)
por: Silva,Erik dos Santos
Publicado em: (2014)
article Nanocomposites of poly(methyl methacrylate) (PMMA) and montmorillonite (MMT) Brazilian clay: A tribological study
por: Ito, Edson Noriyuki
Publicado em: (2021)
por: Ito, Edson Noriyuki
Publicado em: (2021)
article Rheological and mechanical characterization of poly (methyl methacrylate)/silica (PMMA/SiO2 ) composites
por: Nascimento, Maria Carolina Burgos Costa do
Publicado em: (2021)
por: Nascimento, Maria Carolina Burgos Costa do
Publicado em: (2021)
article Effect of alumina on the properties of poly(methyl methacrylate)/alumina composites obtained by melt blending
por: Ito, Edson Noriyuki
Publicado em: (2021)
por: Ito, Edson Noriyuki
Publicado em: (2021)
article Enthalpy relaxation studies in polymethyl methacrylate networks with different crosslinking degrees
por: Alves, N. M.
Publicado em: (2005)
por: Alves, N. M.
Publicado em: (2005)
article Effect of processing conditions on the mechanical and morphological properties of elastomeric poly (Methyl Methacrylate)/polycarbonate blends
por: Ito, Edson Noriyuki
Publicado em: (2021)
por: Ito, Edson Noriyuki
Publicado em: (2021)
article Synthesis and photophysical properties of a poly(methyl methacrylate) polymer with carbazolyl side groups
por: Martins,Tatiana D.
Publicado em: (2008)
por: Martins,Tatiana D.
Publicado em: (2008)
article Synthesis of poly(ethyl methacrylate-co-methyl methacrylate) obtained via ATRP using ruthenium benzylidene complexes
por: Afonso,Maria Beatriz Alves
Publicado em: (2018)
por: Afonso,Maria Beatriz Alves
Publicado em: (2018)
article Synthesis of poly(ethyl methacrylate-co-methyl methacrylate) obtained via ATRP using ruthenium benzylidene complexes
por: Alves Afonso, Maria Beatriz
Publicado em: (2018)
por: Alves Afonso, Maria Beatriz
Publicado em: (2018)
article Study of castor oil polyurethane - poly(methyl methacrylate) semi-interpenetrating polymer network (SIPN) reaction parameters using a 2³ factorial experimental design
por: Cunha,Fernanda Oliveira Vieira da
Publicado em: (2004)
por: Cunha,Fernanda Oliveira Vieira da
Publicado em: (2004)
article Structure and nanomechanical characterization of synthetic calcium-silicate-hydrate with poly-methacrylic acid
por: Pelisser,Fernando
Publicado em: (2020)
por: Pelisser,Fernando
Publicado em: (2020)
article Kinetic and Viscoelastic Study of Liquid Thermoplastic Matrix Based on Methyl Methacrylate Copolymers
por: Silveira, Daniel Consoli
Publicado em: (2023)
por: Silveira, Daniel Consoli
Publicado em: (2023)
article Synthesis and characterization of poly(ethyl methacrylate-co-methacrylic acid) magnetic particles via miniemulsion polymerization
por: Araújo, José Humberto de
Publicado em: (2022)
por: Araújo, José Humberto de
Publicado em: (2022)
book Bioactive composites reinforced with inorganic glasses and ceramics for tissue engineering applications
por: Barros, Alexandre A.
Publicado em: (2014)
por: Barros, Alexandre A.
Publicado em: (2014)
article Utilization of Autogenous Bone, Bioactive Glasses, and Calcium Phosphate Cement in Surgical Mandibular Bone Defects in Cebus apella Monkeys
por: Cancian, Daniela Cristina Joannitti
Publicado em: (2022)
por: Cancian, Daniela Cristina Joannitti
Publicado em: (2022)
groups Assessing the Safety of Polymeric Nanoparticulated Systems developed for Drug Delivery with Human Osteoblasts
por: Dias, Kamila
Publicado em: (2018)
por: Dias, Kamila
Publicado em: (2018)
article Poly(glycidyl methacrylate)/bacterial cellulose nanocomposites: preparation, characterization and post-modification
por: Faria, Marisa
Publicado em: (2019)
por: Faria, Marisa
Publicado em: (2019)
article Time-Temperature and Time-Stress Correspondence in Non-Linear Creep-Experimental Amorphous Polymer Behaviour and Quantitative Modelling Approaches
por: André, José Reinas
Publicado em: (2004)
por: André, José Reinas
Publicado em: (2004)
article Synthesis of polyHEMA hydrogels for using as biomaterials. Bulk and solution radical-initiated polymerization techniques
por: Seidel,Juliana Matos
Publicado em: (2000)
por: Seidel,Juliana Matos
Publicado em: (2000)
article Adhesion of L929 mouse ribroblast cells on poly(styrene)/poly(methyl methacrylate) films
por: Melo,Adriana de
Publicado em: (2009)
por: Melo,Adriana de
Publicado em: (2009)
article Is Poly(Methyl Methacrylate) (PMMA) a suitable substrate for ALD?: A review
por: Forte, Marta
Publicado em: (2021)
por: Forte, Marta
Publicado em: (2021)
article Ru-dimethyl sulfoxide complexes as catalysts precursors for ROMP of norbornene and ATRP of methyl methacrylate
por: Borim, Patricia
Publicado em: (2018)
por: Borim, Patricia
Publicado em: (2018)
article Photocatalytic activity of ZnO- and TiO2- coated poly (methyl methacrylate) microcapsules by atomic layer deposition for water purification
por: Forte, Marta A.
Publicado em: (2024)
por: Forte, Marta A.
Publicado em: (2024)
article Ions Release and pH of Calcium Hydroxide-, Chlorhexidine- and Bioactive Glass-Based Endodontic Medicaments
por: Carvalho,Ceci Nunes
Publicado em: (2016)
por: Carvalho,Ceci Nunes
Publicado em: (2016)
article Study of the structural, thermal, rheological and film properties of functional copolymers of hydroxyethyl acrylate and methyl methacrylate
por: Mejia,María
Publicado em: (2016)
por: Mejia,María
Publicado em: (2016)
article Wood-polymer composite: physical and mechanical properties of some wood species impregnated with styrene and methyl methacrylate
por: Stolf,Denise Ortigosa
Publicado em: (2004)
por: Stolf,Denise Ortigosa
Publicado em: (2004)
article Effect of processing methods on the cytotoxicity of methyl methacrylate-based ocular prostheses: An in vitro study
por: da Silva, Emily Vivianne Freitas
Publicado em: (2022)
por: da Silva, Emily Vivianne Freitas
Publicado em: (2022)
article Atom Transfer Radical Polymerization of Methyl Methacrylate Mediated by Grubbs 1st and 2nd Generation Catalysts: Insight into the Active Species
por: Afonso,Maria Beatriz A.
Publicado em: (2017)
por: Afonso,Maria Beatriz A.
Publicado em: (2017)
article Atom Transfer Radical Polymerization of Methyl Methacrylate Mediated by Grubbs 1st and 2nd Generation Catalysts: Insight into the Active Species
por: Afonso, Maria Beatriz A.
Publicado em: (2018)
por: Afonso, Maria Beatriz A.
Publicado em: (2018)
article Poly(dimethyl siloxane) surface modification by low pressure plasma to improve its characteristics towards biomedical applications
por: Pinto, S.
Publicado em: (2010)
por: Pinto, S.
Publicado em: (2010)
article Chemical resistance of core-shell particles (PS/PMMA) polymerized by seeded suspension
por: Ribeiro,Luiz Fernando Belchior
Publicado em: (2017)
por: Ribeiro,Luiz Fernando Belchior
Publicado em: (2017)
article Use of methyl methacrylate, moulded in its paste phase, to fill the orbital cavity of dogs, after exenteration in cases of ophthalmic neoplasias: a report of three cases
por: Talieri,Ivia Carmem
Publicado em: (2004)
por: Talieri,Ivia Carmem
Publicado em: (2004)
article Departure from the vogel behaviour in the glass transition region-thermally stimulated recovery, creep and dynamic mechanical analysis studies
por: Alves, N. M.
Publicado em: (2004)
por: Alves, N. M.
Publicado em: (2004)
article Síntese de fotoprotetores e sua imobilização em poli(metacrilato de metilo): um projeto integrado de química orgânica, química de polímeros e fotoquímica
por: Murtinho, Dina Maria B.
Publicado em: (2010)
por: Murtinho, Dina Maria B.
Publicado em: (2010)
article Síntese de fotoprotetores e sua imobilização em poli(metacrilato de metilo): um projeto integrado de química orgânica, química de polímeros e fotoquímica
por: Murtinho,Dina Maria B.
Publicado em: (2010)
por: Murtinho,Dina Maria B.
Publicado em: (2010)
article Ruthenium(II) complexes of Schiff base derived from cycloalkylamines as pre-catalysts for ROMP of norbornene and ATRP of methyl methacrylate
por: Afonso, Maria Beatriz A.
Publicado em: (2018)
por: Afonso, Maria Beatriz A.
Publicado em: (2018)
article Poly(glycidyl methacrylate)/bacterial cellulose nanocomposites: preparation, characterization and post-modification
por: Faria, Marisa
Publicado em: (2019)
por: Faria, Marisa
Publicado em: (2019)
Atividades financiadas
Não foram encontrados projetos financiados.
Registos relacionados
-
article Poly (Methyl Methacrylate)-SiC Nanocomposites Prepared Through in Situ Polymerization
por: Tommasini,Flávio James
Publicado em: (2018) -
article Thermal properties of poly (methyl methacrylate)/organomodified montmorillonite nanocomposites obtained by in situ photopolymerization
por: Valandro,Silvano Rodrigo
Publicado em: (2014) -
article Evaluation of magnetic poly(methyl methacrylate) microspheres as catalysts in heterogeneous Fenton processes
por: Silva,Alan Kardec da
Publicado em: (2022) -
article Rheological and mechanical characterization of poly (methyl methacrylate)/silica (PMMA/SiO2) composites
por: Silva,Erik dos Santos
Publicado em: (2014) -
article Nanocomposites of poly(methyl methacrylate) (PMMA) and montmorillonite (MMT) Brazilian clay: A tribological study
por: Ito, Edson Noriyuki
Publicado em: (2021)