Energy harvesting from the environment based on electroactive polymers has been increasing in recent years. Ferroelectric polymers are used as mechanical-to-electrical energy transducers in a wide range of applications, scavenging the surrounding energy to power low-power devices. These energy-harvesting systems operate by taking advantage of the piezoelectric, pyroelectric, and magnetoelectric properties of the polymers, harvesting wasted environmental energy and converting it mainly into electrical energy. There have been developed different nano- and micro-scale power harvesters with an increasing interest for powering mobile electronics and low-power devices, including applications in remote access areas. Novel electronic devices are developed based on low-power solutions, and therefore, polymer-based materials represent a suitable solution to power these devices. Among the different polymers, the most widely used in the device application is the poly(vinylidene fluoride) (PVDF) family, due to its higher output performance.

Poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), microstructures have been produced using different solvents, including green ones, by different techniques, such as solvent casting, screen-printing, replica molding, electrospray, and electrospinning. The obtained microstructures span from simple porous and dense films to spheres, fibers, and patterned three-dimensional architectures, with no significant variation in their physicochemical and electrical properties. The simplicity, low cost, and reproducibility of the processing techniques allied to their versatility to adapt to other materials to produce controlled and tailored microstructures with specific properties demonstrate their potential in a wide range of technological applications, including biomedical, energy storage, sensors and actuators, and filtration.

Polymer-based magnetoelectric (ME) nanocomposites are an enabling material technology for a wide range of applications in the area of digitalization strategies. Due to its highest piezoelectric response among polymers, poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) is the piezoelectric matrix most used in polymer-based ME materials with over 80% of the total reports, with the resulting composites typically processed from solutions with N,N-dimethylformamide (DMF), a toxic solvent. Nevertheless, environmentally friendlier approaches and sustainable technologies are increasingly being required. This work demonstrates that P(VDF-TrFE)/Co2Fe2O4 nanocomposites can be successfully prepared from solution using three different environmentally friendlier solvents: dimethyl sulfoxide (DMSO), N,N′-dimethylpropyleneurea (DMPU), and triethyl phosphate (TEP) with different dipole moments. It is shown that the prepared composite films, with a maximum ME voltage coefficient of 35 mV cm–1 Oe–1 and a maximum sensitivity of 2.2 mV T–1, are suitable for applications, highlighting the path for a new generation of more sustainable ME sensors.

Polymer composites comprising the ionic liquid (IL) [Bmim][FeCl4] and poly(vinylidene fluoride) (PVDF) have been developed for humidity sensing applications. Different IL contents (5, 10, and 20 wt %) were incorporated into the PVDF matrix and the morphological, physical–chemical and electrical properties of the composites evaluated, together with their humidity sensitivity response. Higher IL contents (20 wt %) induce a porous morphology in the composites. Further, IL incorporation leads to the crystallization of PVDF in the electroactive β phase, which content increases with the incorporation of IL into the polymer. The thermal stability of the composites decreases with increasing IL content. The humidity sensing response of the composites was evaluated with relative humidity variations from 35 to 90%. It is shown that all composites exhibit a linear resistance variation with the relative humidity, the sensitivity to humidity variations increasing linearly with the IL content. The developed materials show a strong potentiality for printable humidity sensors.