Foram avaliados os efeitos da radiação gama nas doses de 1,5 e 3,0kGy, em peitos de frango embalados em embalagem convencional e a vácuo. As amostras embaladas foram submetidas à irradiação e estocadas sob refrigeração (4ºC) por 30 dias. A radiação mostrou-se eficiente na redução de mesófilos aeróbios estritos e facultativos viáveis, coliformes totais e termotolerantes, com destaque para Salmonella spp. Os bolores e leveduras mostraram-se bastante resistentes à radiação. Os resultados sugerem que a dose de 3,0kGy pode ser utilizada no controle da microbiota do peito de frango armazenado sob refrigeração, sendo uma alternativa para o aumento da vida de prateleira por até 10 dias, ao garantir a segurança do consumidor pela eliminação de possíveis patógenos.

In the present work, a new methodology to produce bioactive coatings on the surface of starch-based biodegradable polymers or other polymeric biomaterials is proposed. A sodium silicate gel is employed as an alternative nucleating agent to the more typical bioactive glasses for inducing the formation of a calcium-phosphate (Ca-P) layer. The method has the advantage of being able to coat efficiently both compact materials and porous 3D architectures aimed at being used on tissue replacement applications and as tissue engineering scaffolds. By means of this treatment, it is possible to observe the formation of an apatite-like layer, only after 6 hours of simulated body fluid immersion. For the porous materials, this layer could also be observed inside the pores, clearly covering the cell walls. Furthermore, an increase of the surface hydrophilicity (higher amount of polar groups in the surface) might contribute to the formation of silanol groups that also act as apatite inductors. After 30 days of SBF immersion, the apatite-like films exhibit a partially amorphous nature and the Ca/P ratios became much closer to the value attributed to hydroxyapatite (1.67). The obtained results are very promising for the development of cancellous bone replacement materials and for pre-calcifying bone tissue engineering scaffolds.

The present study describes a methodology to produce bioactive coatings on the surface of starch based biodegradable polymers or other polymeric biomaterials. As an alternative to the more typical bioactive glass percursors, a sodium silicate gel is being employed as a nucleating agent, for inducing the formation of a calcium-phosphate (Ca-P) layer. The method has the advantage of being able to coat efficiently both compact materials and porous 3D architectures aimed at being used on tissue replacement applications and as bone tissue engineering scaffolds. This treatment is also very effective in reducing the incubation periods, being possible to observe the formation of an apatite-like layer, only after 6 h of immersion in a simulated body fluid (SBF). The influence of the SBF concentration on the formation of the apatite coating was also studied. The apatite coatings formed under different conditions were analyzed and compared in terms of morphology, chemical composition and structure. After the first days of SBF immersion, the apatite-like films exhibit the typical cauliflower like morphology. With increasing immersion times, these films exhibited a partially amorphous nature and the Ca/P ratios became very closer to the value attributed to hydroxyapatite (1.67). The obtained results are very promising for pre-calcifying bone tissue engineering scaffolds. Therefore, in order to study cell behavior and response to these apatite coatings, adhesion, morphology, and proliferation of a human osteoblast cell line (SaOS-2) was also analyzed after being cultured in the coatings formed after 15 days of immersion in SBF. Results indicate a good correlation between crystallinity of the apatite like coatings formed in these conditions and respective cell spreading and morphology. In general, higher cell proliferation was observed for higher crystalline Ca-P coatings.

[Excerpt] The impressive mechanical properties, along with established biocompatibility and slow degradability, render silk as an interesting biomaterial for bone tissue engineering applications. New silk-based scaffolds resembling bone lamellar structure were successfully developed using a freeze-drying technique. The structure could be controlled directly by the solute concentration and freezing parameters. The lamellar scaffolds disclosed a controlled and regular morphology (lamellar thickness: µ3.5 mm; interlamelar distance: µ15 mm). In order to induce water stability, different posttreatments were studied including methanol treatment, water annealing and steam sterilization. [...]

Spinal cord injuries (SCI) present a major challenge to therapeutic development due to its complexity. Combinatorial approaches using biodegradable polymers that can simultaneously provide a tissue scaffold, a cell vehicle, and a reservoir for sustained drug delivery have shown very promising results. In our previous studies we have developed a novel hybrid system consisting of starch/poly-e-caprolactone (SPCL) semi-rigid tubular porous structure, based on a rapid prototyping technology, filled by a gellan gum hydrogel concentric core for the regeneration within spinal-cord injury sites. In the present work we intend to promote enhanced osteointegration on these systems by pre-mineralizing specifically the external surfaces of the SPCL tubular structures, though a biomimetic strategy, using a sodium silicate gel as nucleating agent. The idea is to create two different cell environments to promote axonal regeneration in the interior of the constructs while inducing osteogenic activity on its external surface. By using a Teflon cylinder to isolate the interior of the scaffold, it was possible to observe the formation of a bone-like poorly crystalline carbonated apatite layer continuously formed only in the external side of the tubular structure. This biomimetic layer was able to support the adhesion of Bone Marrow Mesenchymal Stem Cells, which have gone under cytoskeleton reorganization in the first hours of culture when compared to cells cultured on uncoated scaffolds. This strategy can be a useful route for locally stimulate bone tissue regeneration and facilitating early bone ingrowth.

There has been a growing awareness in materials science that the adaptation of nature biological processes can lead to significant progresses in the controlled fabrication of advanced materials for an all range of applications. To learn from, understand and apply these natural processes for producing calcium phosphate coatings that are biologically similar to bone apatite, mimicking its properties, has driven the attention of many researchers in recent years. This article reviews the most relevant advances in this emerging research field, pointing out several approaches being introduced and explored by distinct laboratories.

An important challenge in the biomaterials field is to mimic the structure of functional tissues via cell and extracellular matrix (ECM) alignment and anisotropy. Toward this goal, silk-based scaffolds resembling bone lamellar structure were developed using a freeze-drying technique. The structure could be controlled directly by solute concentration and freezing parameters, resulting in lamellar scaffolds with regular morphology. Different post-treatments, such as methanol, water annealing and steam sterilization, were investigated to induce water stability. The resulting structures exhibited significant differences in terms of morphological integrity, structure and mechanical properties. The lamellar thicknesses were ∼2.6 μm for the methanol-treated scaffolds and ∼5.8 μm for water-annealed. These values are in the range of those reported for human lamellar bone. Human bone marrow-derived mesenchymal stem cells (hMSC) were seeded on these silk fibroin lamellar scaffolds and grown under osteogenic conditions to assess the effect of the microstructure on cell behavior. Collagen in the newly deposited ECM was found aligned along the lamellar architectures. In the case of methanol-treated lamellar structures, the hMSC were able to migrate into the interior of the scaffolds, producing a multilamellar hybrid construct. The present morphology constitutes a useful pattern onto which hMSC cells attach and proliferate for guided formation of a highly oriented extracellular matrix.