This study evaluated the in vitro susceptibility of C. albicans, C. dubliniensis, C. tropicalis and C. krusei to photodynamic therapy (PDT) induced by Photogem® and light emitting diode (LED). Suspensions of each Candida strain were treated with three photosensitizer (PS) concentrations (10, 25 and 50 mg/L) and exposed to 18.0, 25.5 and 37.5 J/cm² LED light fluences (λ ~ 455 nm). Control suspensions were treated only with PS concentrations, only exposed to the LED light fluences or not exposed to LED light or PS. Sixteen experimental conditions were obtained and each condition was repeated three times. From each sample, serial dilutions were obtained and aliquots were plated on Sabouraud Dextrose Agar. After incubation of plates (37 ºC for 48 hours), colonies were counted (cfu/mL) and the data were statistically analyzed by ANOVA and the Tukey test (α=0.05). Complete killing of C. albicans was observed after 18.0 J/cm² in association with 50 mg/L of PS. C. dubliniensis were inactivated after 18.0 J/cm² using 25 mg/L of PS. The inactivation of C. tropicalis was observed after photosensitization with 25 mg/L and subsequent illumination at 25.5 J/cm². For C. krusei, none of the associations between PS and light resulted in complete killing of this species. PDT proved to be effective for the inactivation of C. albicans, C. dubliniensis and C. tropicalis. In addition, reduction in the viability of C. krusei was achieved with some of the PS and light associations.

Background: Recent evidences show the promising applications of Curcumin (CUR) against different diseases, including some of the main oral pathologies. The objective of this review paper was to catalog articles that investigated the photodynamic effect of CUR for oral diseases in the last 15 years. Methods: The establishment of defined criteria for data collection was proposed and a total of 173 articles were identified, but only 26 were eligible for full text reading. Their main findings were critically reviewed to provide a state-of-the-art overview of the use of CUR in Dentistry. Results: Antimicrobial potential of CUR was the subject of the majority of the articles. CUR showed great potential for photodynamic action against oral bacteria, fungi, and strains resistant to conventional drugs. Some authors indicated the efficacy of CUR-mediated Photodynamic Therapy to reduce tumor cells while others observed low cytotoxicity in mammalian cells and healthy oral mucosa. However, CUR solubility and stability is still a problem for the photodynamic technique, and to overcome these drawbacks, biocompatible vehicles need to be better explored. Conclusions: Investigations have used different CUR concentrations and formulations, as well as different light parameters. This fact, together with the lack of in vivo studies, clearly shows that clinical protocols have not been established yet. Investigations are necessary in order to establish the best concentrations and safe vehicles to be used for this technique.

The buccal mucosa is accessible, shows rapid repair, has an excellent blood supply, and shows the absence of the first-pass effect, which makes it a very attractive drug delivery route. However, this route has limitations, mainly due to the continuous secretion of saliva (0.5 to 2 L/day), which may lead to dilution, possible ingestion, and unintentional removal of the active drug. Nanotechnology-based drug delivery systems, such as liquid crystalline systems (LCSs), can increase drug permeation through the mucosa and thereby improve drug delivery. This study aimed at developing and characterizing the mechanical, rheological, and mucoadhesive properties of four liquid crystalline precursor systems (LCPSs) composed of four different aqueous phases (i) water (FW), (ii) chitosan (FC), (iii) polyethyleneimine (FP), or (iv) both polymers (FPC); oleic acid was used as the oil phase, and ethoxylated and propoxylated cetyl alcohol was used as the surfactant. Polarized light microscopy and small-angle X-ray scattering indicated that all LCPSs formed liquid crystalline states after incorporation of saliva. Rheological, texture, and mucoadhesive assays showed that FPC had the most suitable characteristics for buccal application. In vitro release study showed that FPC could act as a controlled drug delivery system. Finally, based on in vitro cytotoxicity data, FPC is a safe buccal drug delivery system for the treatment of several buccal diseases.

O objetivo do estudo foi estimar a confiabilidade e a validade da Escala de atitudes em relação à Estatística (EAE). A amostra, composta por 355 alunos do curso de Ciências Farmacêuticas, foi subdividida em 2 partes iguais: a primeira foi utilizada para explorar a estrutura fatorial da EAE e a segunda para confirmá-la. A Escala foi aplicada a 40 alunos em dois momentos distintos para verificar sua reprodutibilidade. Aplicou-se o Teste de esfericidade de Bartlett e o índice Kaiser-Meyer-Olkin (KMO). A extração dos fatores foi realizada pela Análise de Componentes Principais. Realizou-se rotação ortogonal Varimax. Foram calculados o Coeficiente alfa de Cronbach e o Coeficiente de Correlação Intraclasse. Para verificar o grau com que as dimensões satisfazem a estrutura esperada realizou-se análise fatorial confirmatória. O teste de esfericidade de Bartlett e o índice KMO foram excelentes (χ2= 2057,973, p=0,000; KMO=0,929). A maior parte dos itens apresentou fração de variância explicada pelos fatores comuns superiores a 0,50. Na distribuição dos itens verificou-se dois fatores com autovalores acima de 1 (λ=9,099; λ =2,789) explicando 59,44% da variância total. A questão 2 saturou-se em mais que um fator. Observou-se excelente consistência interna e reprodutibilidade da EAE. Todos os itens da escala apresentaram pesos fatoriais (λ ≥0,5) e de confiabilidade individuais adequados (R2≥0,25) e o modelo fatorial apresentou índices de qualidade de ajustamento bons (χ2/df=1,909, CFI=0,923, GFI=0,837, RMSEA: 0,075) com adequada validade convergente (VEMj≥0,5; CCj≥0,7) e discriminante (VMEi e VMEj≥ρij2). A Escala de atitudes em relação à Estatística apresenta estrutura bidimensional com níveis de validade e confiabilidade adequados.

RESUMO: O objetivo do estudo foi estimar a validade e confiabilidade da Escala de atitudes em relação à Estatística (EAE) quando aplicada a estudantes de Ciências Farmacêuticas. A amostra de 253 estudantes foi subdividida em duas partes. Sessenta por cento da amostra foi utilizada para explorar a estrutura fatorial e 40% para confirmá-la. Para verificar a reprodutibilidade da escala a mesma foi aplicada em duplicata a 40 estudantes. Aplicou-se o Teste de esfericidade de Bartlett e o índice Kaiser-Meyer-Olkin (KMO). A extração dos fatores foi realizada pela Análise de Componentes Principais. Realizou-se rotação ortogonal Varimax. Calculou-se o Coeficiente alfa de Cronbach (α) e o Coeficiente de Correlação Intraclasse (ρ). Realizou-se análise fatorial confirmatória. Elaborou-se um modelo hierárquico de segunda ordem (MHSO). O teste de esfericidade de Bartlett e o índice KMO foram excelentes (χ 2 =1835,815, p<0,001; KMO=0,935). Verificou-se dois fatores com valores próprios acima de 1 (λ=9,748; λ=2,086) explicando 59,2% da variância total. A questão 2 foi removida. Observou-se excelente consistência interna e reprodutibilidade. O modelo fatorial apresentou índices de qualidade de ajustamento bons (λ=0,59-0,86, χ 2 /gl=1,691, CFI=0,919, GFI=0,804, RMSEA=0,079). A validade discriminante dos fatores foi adequada. A EAE apresentou estrutura bifatorial na amostra com níveis de validade e confiabilidade adequados.

Introduction This study assessed the influence of tube current settings (milliamperes [mA]) on the diagnostic detection of root fractures (RFs) using cone-beam computed tomographic (CBCT) imaging. Method Sixty-eight human anterior and posterior teeth were submitted to root canal preparation, and 34 root canals were filled. The teeth were divided into 2 groups: the control group and the fractured group. RFs were induced using a universal mechanical testing machine; afterward, the teeth were placed in a phantom. Images were acquired using a Scanora 3DX unit (Soredex, Tuusula, Finland) with 5 different mA settings: 4.0, 5.0, 6.3, 8.0, and 10.0. Two examiners (E1 and E2) classified the images according to a 5-point confidence scale. Intra- and interexaminer reproducibility was assessed using the kappa statistic; diagnostic performance was assessed using the area under the receiver operating characteristic curve (AUROC). Results Intra- and interexaminer reproducibility showed substantial (κE1 = 0.791 and κE2 = 0.695) and moderate (κE1 × E2 = 0.545) agreement, respectively. AUROC was significantly higher (P ≤ .0389) at 8.0 and 10.0 mA and showed no statistical difference between the 2 tube current settings. Conclusions Tube current has a significant influence on the diagnostic detection of RFs in CBCT images. Despite the acceptable diagnosis of RFs using 4.0 and 5.0 mA, those settings had lower discrimination abilities when compared with settings of 8.0 and 10.0 mA.