Administrative decentralization has been widely promoted as a pathway to more responsive and context-sensitive governance; however, its implications for local environmental management remain underexplored. This study examines how to leverage local environmental management in the context of administrative decentralization in Portugal, focusing on coastal municipalities. Our findings reveal that despite formal administrative decentralization reforms, central government retains strong control through uniform competence structures that disregard regional specificities, limiting municipalities' capacity for local environmental management. Municipalities exhibit a preference for maintenance and operational tasks over strategic planning roles, reflecting constrained autonomy and resource limitations. Drawing on these insights, we propose a conceptual framework for strengthening local environmental management under administrative decentralization, highlighting four critical factors: (i) institutional capacity (political, human, and technical resources); (ii) financial and political autonomy; (iii) multi-level and cross-sectoral collaboration; and (iv) local political willingness to act proactively. This framework offers practical guidance for designing context-sensitive, participatory approaches to environmental governance, contributing to both theoretical debates and policy implementation. Our study underscores the importance of capacity-building and sustained stakeholder engagement to ensure decentralization reforms translate into effective local environmental outcomes.

The aquaculture industry produces vast amounts of organic side streams that are often ensilaged for later use in low value applications. However, the potential of converting fish silage, particularly the proteinaceous fraction, into more economically valuable products such as biodegradable polyhydroxyalkanoates (PHA), has not been explored. This study investigates the valorisation of salmon peptone, the proteinaceous fraction obtained from salmon silage, into PHA by mixed microbial cultures (MMC) under conditions without nutrient limitation, where the high concentration of ammonia (up to 2.3 ± 0.2 gN/L) which the culture was subjected to has not been previously reported. Acidogenic fermentation of salmon peptone (SP) was attained in a continuous reactor, resulting in the production of a fermentate rich in acetate and butyrate (16.4 ± 1.6 gCODFP/L). The enriched MMC with PHA-accumulating organisms was selected in a sequential batch reactor (SBR) under nutrient-rich conditions (100 gCOD: 27.6 gN: 0.48 gP at OLR 7.1 gCODFP/(L.d)). The dominant microorganisms in the enriched culture were from the genus Brachymonas, which are described as capable of simultaneous cell growth and PHA accumulation, storing up to 53.0 ± 3.4% wt. of P(3HB-co-3HV) with a 3HV content of 34% wt. Despite the high ammonia concentration and constant nutrient availability, a good overall PHA yield (189 gPHA/kgSP) and global volumetric PHA productivity (3.10 ± 0.11 gPHA/(L.h)) were achieved. The results demonstrate the technological feasibility of producing PHA from salmon peptone under conditions that are typically considered unfavorable for PHA accumulation, which represents a significant novelty of this work.

Estuaries are continually threatened by anthropogenic pressures, consequently, a large group of contaminants harmful to human health affects the aquatic biota; therefore, it is necessary to monitor their quality. This study deals with the determination of a large group of compounds representing different endocrine-disrupting compounds (EDCs) classes [21 pesticides, 4 polycyclic musk fragrances, 4 UV-filters, 7 bisphenols, 6 polybrominated diphenyl ethers (PBDEs) and 8 of their methoxylated (MeO-BDEs)] in several estuarine species (fish, bivalves, crustaceans, earthworm, and macroalgae) collected seasonally along one year in two distinct areas of Tagus River estuary (“contaminated” vs. “clean” areas). The most abundant compounds found were galaxolide (HHCB) (81% positive samples; 0.04–74 ng/g ww), isoamyl 4-methoxycinnamate (IMC) (64%; 1.13–251 ng/g ww), alachlor (44%; 0.08–16 ng/g ww), and BDE-47 (36%; 0.06–2.26 ng/g ww). Polycyclic musks were the most frequent contaminants in fish (seabass, barbus, mullet, and sole) and macroalgae samples, while UV-filters were predominant in bivalves and crustaceans, and bisphenols in earthworms. Seasonal variation was verified for Σpesticides and Σmusks, with significantly higher levels in summer and autumn, whereas ΣUV-filters highest levels were found in spring and summer, and for ΣPBDEs statistically higher levels were registered in cold seasons (autumn and winter). Σbisphenols were significantly lower in spring than in the other seasons. In general, considering all species analysed in both areas, no statistically significant differences (p > 0.05) were verified between the two collection areas. Based on the estimated daily intake data, consumption of fish from this estuary is unlikely to be a human health concern, since the levels of contamination were below the toxicological threshold values. Overall, the data obtained in this study will allow regulatory authorities to identify and prioritize contaminants monitoring programs in estuaries, such as the case of bisphenol A, which was found, for the first time, in earthworm and clam species.

Bisphenol A (BPA) and its substitutes bisphenol S (BPS) and bisphenol F (BPF) are endocrine disrupting chemicals widely used in the production of polycarbonate plastics, epoxy resins and thermal papers. The aim of the review was to identify occupational studies using human biomonitoring (HBM) as a tool for bisphenol exposure assessment and to characterize research gaps on the topic as part of the HBM4EU project. Hence, a systematic literature search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was conducted for articles published between 2000 and 27th March 2020 across three databases (PubMed, Scopus and Web of Science). Thirty studies on the occupational HBM of BPA met the inclusion criteria. Regarding BPS and BPF, only 4 and 2 publications were retrieved, respectively. Fifty-seven percent (57%) of the studies selected for BPA were conducted in Asia whereas half of BPS and BPF studies were undertaken in Europe. Studies on BPA in plastic and epoxy resin sectors were infrequent in Europe while Asian data showed higher exposure when the substance is employed as raw material. The main data on BPS were among cashiers while BPF data were available from incinerator workers. Several research gaps have been identified: (i) shortage of HBM studies on occupational exposure, especially to BPS and BPF; (ii) different methodological designs making suitable comparisons between studies difficult; and (iii) only few studies conducted on the industrial applications of bisphenols outside Asia. This review highlights the lack of recent occupational HBM studies on bisphenols and the need for a harmonized approach to acquire reliable data. Considering the increasing replacement of BPA by BPS and BPF, it is of relevance to evaluate the exposure to these substances and the impact of the available risk management measures on workers exposure and possible health risk.

Seahorses are one of the most unique and enigmatic animals, recognized as flagship species for several conservation issues. Unfortunately, seahorses' populations have been declining and their unique lifestyle may constrain the ability of these animals to evolve in the future climate scenarios. They inhabit shallow coastal waters that display daily or seasonal environmental fluctuations. Yet, few studies have scrutinized the impacts of climate changes on these iconic species. Within this context, the objective of this work was to test the effects of an extreme hypoxia exposure (~27 % dissolved oxygen for approximately 7 h) on the metabolism, behaviour and food intake of the temperate seahorse Hippocampus hippocampus. Regarding metabolism, hypoxia exposure led to a significant reduction in metabolic rates and an increase in ventilation rates. Seahorses showed signs of movement lethargy under oxygen depletion. The results show that a small but extreme exposure to hypoxia is tolerable by seahorses despite inducing metabolic and behavioural changes, that may jeopardize the future development and survival of these iconic organisms.

This study aimed to analyse the added value of using ecotoxicological tools to complement and improve the assessment of natural water bodies status, in situations of climate change, with a higher frequency of extreme events as floods or droughts. Four water bodies of streams in the Guadiana Basin (Álamos, Amieira, Lucefécit, Zebro) were studied in 2017 and 2018 and classified based on the Water Framework Directive (WFD) parameters: Biological Quality Element – Phytobenthos (diatoms), General chemical and physicochemical elements, Specific pollutants, and Priority Substances. Complementarily, bioassays (including lethal and sublethal parameters) were carried out with organisms of different trophic levels: (i) the bacteria Aliivibrio fischeri; (ii) the microalgae Pseudokirchneriella subcapitata; (iii) the crustaceans Daphnia magna, Thamnocephalus platyurus and Heterocypris incongruens. A classification system with 5 scores was developed, permitting to classify water bodies from non-toxic (EC50 > 100 %; growth and feeding rate > 80 %; blue) to highly toxic (EC50 < 10 %; growth and feeding rate < 10 %; red). The comparison between the classification based on the WFD parameters and on ecotoxicological endpoints showed similar results for 71 % of the samples, and significant positive Pearson correlations were detected between the diatom-based Specific Polluosensitivity Index (SPI) and EC50V.fisheri, the algae growth rate and Shannon diversity index. These results indicate that when the biological quality elements cannot be used (namely under drought or flooding conditions) the application of ecotoxicological bioassays may be a good alternative. Further, when ecotoxicological parameters were included, an increase of worse classifications (Bad and Poor) was observed, revealing an improvement in the sensitivity of the classification, mainly in presence of specific and priority substances. So, the ecotoxicological analysis appears to provide useful information regarding the potential presence of both known and unknown contaminants at concentrations that cause biological effects (even within the WFD limits), in agreement with several authors that have already suggested its use in biomonitoring.

Electroactive microorganisms can exchange electrons with other cells or conductive interfaces in their extracellular environment. This property opens the way to a broad range of practical biotechnological applications, from manufacturing sustainable chemicals via electrosynthesis, to bioenergy, bioelectronics or improved, low-energy demanding wastewater treatments. Besides, electroactive microorganisms play key roles in environmental bioremediation, significantly impacting process efficiencies. This review highlights our present knowledge on microbial interactions promoting the communication between electroactive microorganisms in a biofilm on an electrode in bioelectrochemical systems (BES). Furthermore, the immediate knowledge gaps that must be closed to develop novel technologies will also be acknowledged.

Circular economy (CE) measures can play a role in reducing greenhouse gas (GHG) emissions, especially in material- and energy-intensive sectors. Yet, their representation in GHG mitigation pathways is still not well captured in climate change mitigation models. To support modelling efforts towards better CE representation, two reviews were conducted: (1) the empirical evidence on the GHG mitigation potential of CE strategies across material supply and demand sectors and R-strategies, and (2) the current modelling approaches used to assess these strategies. Findings show that, while most studies focus on recycling, increasing attention is given to upstream strategies such as material substitution, design for reuse, and service-based business models. Important gaps remain, particularly around Refuse, Rethink, behavioural factors, rebound effects, as well as synergies and trade-offs with climate policy. Industrial ecology methods provide a detailed material flows representation but lack feedback mechanisms and economic dynamics. In contrast, GHG mitigation models offer broader system coverage but often simplify materials and CE dynamics. Better alignment between methods is needed, including shared definitions, improved data, and more collaboration across modelling communities. Strengthening the modelling of CE strategies can support policy-relevant assessments of CE’s contribution to achieving global climate goals.

The atmospheric concentration of CO2 is rising at an alarming pace, creating a pressing need for new and sustainable materials capable of capture and conversion. Poly(ionic liquid)s (PILs) are particularly effective catalysts for processes at or near atmospheric pressure. PILs industrial application poses challenges due to the low porosity of PIL, the limited batch conversion capacity, and the difficulties in reuse. To overcome these limitations, we herein propose the use of AEROPILs catalysts obtained from the integration of PILs in chitosan-based aerogels. These cost-effective highly porous materials have unique and tuneable porous properties making them not only ideal sustainable CO2 sorbents but also promising heterogeneous catalysts. While AEROPILs show moderate yields for CO2 conversion in batch mode, high catalytic activity was achieved when AEROPILs were used to catalyse the CO2 cycloaddition reaction to epoxides in packed-bed reactors operated under continuous flow. The catalytic activity and stability were maintained over 60 h without activity loss, and high productivity (space-time yield of 21.18 gprod h−1 L−1). This research reveals the pioneering use of AEROPILs to efficiently upcycle CO2 into cyclic carbonate under a continuous flow setup.

Assessment of occupational exposure to viruses is crucial to identify virus reservoirs and sources of dissemination at an early stage and to help prevent spread between employees and to the general population. Measuring workers' exposure can facilitate assessment of the effectiveness of protective and mitigation measures in place. The aim of this scoping review is to give an overview of available methods and those already implemented for airborne virus' exposure assessment in different occupational and indoor environments. The results retrieved from the different studies may contribute to the setting of future standards and guidelines to ensure a reliable risk characterization in the occupational environments crucial for the implementation of effective control measures. The search aimed at selecting studies between January 1st 2010 and June 30th 2023 in the selected databases. Fifty papers on virus exposure assessment fitted the eligibility criteria and were selected for data extraction. Overall, this study identified gaps in knowledge regarding virus assessment and pinpointed the needs for further research. Several discrepancies were found (transport temperatures, elution steps, …), as well as a lack of publication of important data related to the exposure conditions (contextual information). With the available information, it is impossible to compare results between studies employing different methods, and even if the same methods are used, different conclusions/recommendations based on the expert judgment have been reported due to the lack of consensus in the contextual information retrieved and/or data interpretation. Future research on the field targeting sampling methods and in the laboratory regarding the assays to employ should be developed bearing in mind the different goals of the assessment.