Visible Light communication is a data transmission technology that uses the LED lighting infrastructure to simultaneously illuminate and communicate. The ubiquitous existence of LED lamps opened a new opportunity for addressing VLC communication in many indoor communication scenarios. The motivation for the application presented in this paper is the modern, efficient management of warehouses supported by autonomous navigation robots that grab goods and deliver the items at the packaging station. This functionality demands bi-directional communication among infrastructures and vehicles. In this paper we propose links for Infrastructure-To-Vehicle (I2V), Vehicle-ToInfrastructure (V2I) and Vehicle-To-Vehicle (V2V) to perform indoors, bi-directional communication for robot navigation in automated warehouses. In this work it is proposed a bidirectional communication system between a static infrastructure and a mobile robot (I2V). The LED lamps of the warehouse illumination system are used to lighten the space, and to transmit information about position and about racks content. The mobile robots communicate with the infrastructure (V2I) to transmit information on the items that are being removed and carried to the packaging station. The communication among the autonomous robots (V2V) provides information on the number of items intended to be collected when the vehicles are in the same lane, possibly with the purpose of collecting the same items. Different codification schemes are proposed to establish the V2I, I2V and V2V links. Tri-chromatic white LEDs with the red and blue chips modulated at different frequencies and a photodetector based on a-SiC:H/a-Si:H with selective spectral sensitivity are used at the emitter and receiver. Position information is provided by each LED lamp to the autonomous vehicle by adequate modulation of the RGB emitters. The decoding strategy is based on accurate calibration of the output signal. Different scenarios were designed and tested. Requirements related to synchronous transmission and flickering were addressed to enhance the system performance.

White LEDS revolutionized the field of illumination technology mainly due to the energy saving effects. Besides lighting purposes LEDs can also be used in wireless communication systems when integrated in Visible Light Communication (VLC) systems. Indoor positioning for navigation in large buildings is currently under research to overcome the difficulties associated with the use of GPS in such environments. The motivation for this application is also supported by the possibility of taking advantage of an existing lighting and WiFi infrastructure. In this work it is proposed an indoor navigation system based on the use of VLC technology. The proposed system includes trichromatic white LEDs with the red and blue chips modulated at different frequencies and a pinpin photodetector with selective spectral sensitivity. Optoelectronic features of both optical sources and photodetector device are analyzed. The photodetector device consists two pin structures based on a-SiC:H and a-Si:H with geometrical configuration optimized for the detection of short and large wavelengths in the visible range. Its sensitivity is externally tuned by steady state optical bias. The localization algorithm makes use of the Fourier transform to identify the frequencies present in the photocurrent signal and the wavelength filtering properties of the sensor under front and back optical bias to detect the existing red and blue signals. The viability of the system was demonstrated through the implementation of an automatic algorithm to infer the photodetector cardinal direction. A capacitive optoelectronic model supports the experimental results and explains the device operation.