Polyazamacrocycles are currently being studied and used in a variety of applications beyond their traditional place in supramolecular and co-ordination chemistry. This study suggests additional applications of these compounds with particular emphasis on their use as antiproliferative agents that could be potentially used to treat cancer. Four polyazamacrocycles were tested in human prostate cancer LNCaP and prostate epithelial PNTA1 cells to analyze changes in cell proliferation and cell death capabilities. Their intracellular localization was also evaluated by confocal microscopy. The results show a decrease in proliferation rate and cell viability of LNCaP and PNTA1, after treatment with these compounds. The decrease in the number of viable cells is similar for the majority of the compounds studied, and at higher concentration, the proliferation efficiency decreased significantly in the cell lines studied. Also, our results suggest that L and L2 induce early apoptosis in PNTA1 cells and late apoptosis/necrosis in LNCaP cells. The compounds did not induce a significant increase in necrosis of both cell types. Although the compounds did not localize in a unique organelle, all of them have as main target the Golgi apparatus and other localization profiles differed depending on the cell line.

Well-defined oligo(ethylene glycol) methyl ether methacrylate (OEOMA) based block copolymers with cationic segments composed by N,N-(dimethylamino) ethyl methacrylate (DMAEMA) and/or 2-(diisopropylamino) ethyl methacrylate (DPA) were developed under biorelevant reaction conditions. These brush-type copolymers were synthesized through supplemental activator and reducing agent (SARA) atom transfer radical polymerization (ATRP) using sodium dithionite as SARA agent. The synthesis was carried out using an eco-friendly solvent mixture, very low copper catalyst concentration, and mild reaction conditions. The structure of the block copolymers was characterized by size exclusion chromatography (SEC) analysis and 1H nuclear magnetic resonance (NMR) spectroscopy. The pH-dependent protonation of these copolymers enables the efficient complexation with plasmid DNA (pDNA), yielding polyplexes with sizes ranging from 200 up to 700 nm, depending on the molecular weight of the copolymers, composition and concentration used. Agarose gel electrophoresis confirmed the successful pDNA encapsulation. No cytotoxicity effect was observed, even for N/P ratios higher than 50, for human fibroblasts and cervical cancer cell lines cells. The in vitro cellular uptake experiments demonstrated that the pDNA-loaded block copolymers were efficiently delivered into nucleus of cervical cancer cells. The polymerization approach, the unique structure of the block copolymers and the efficient DNA encapsulation presented can open new avenues for development of efficient tailor made gene delivery systems under biorelevant conditions.

Lantibiotics are a promising class of natural antimicrobial peptides. Lichenicidin is a two-peptide lantibiotic in which two mature peptides act synergistically to exhibit full bioactivity. Considering the two-peptide lantibiotics described so far, only cytolysin has been deeply characterized in terms of toxicity towards eukaryotic cells and it was found to be hemolytic and cytotoxic. This work aimed to improve the production of lichenicidin in vivo and characterize its antibacterial activity and toxicity against human cells. Peptides were purified and minimal inhibitory concentration (MIC) was determined against several strains; a time-kill assay was performed with Staphylococcus aureus. The hemolytic effect of lichenicidin was evaluated on blood samples from healthy donors and its toxicity towards human fibroblasts. The quantity of purified peptides was 1 mg/l Bliα and 0.4 mg/l Bliβ. MIC for methicillin-sensitive and resistant S. aureus (MSSA and MRSA) strains were 16-32 µg/ml and 64-128 µg/ml, respectively. At the MIC, lichenicidin took less than 3 h to eliminate MSSA, indicating a strong bactericidal effect. It induces cell lysis at the highest concentration, an effect that might be potentiated by Bliβ. Lichenicidin was not cytotoxic to human erythrocytes and fibroblasts. In this work, we evaluated the therapeutic potential of lichenicidin as a possible antimicrobial alternative.

Adult B-cell acute lymphoblastic leukemia remains a major therapeutic challenge, requiring a better characterization of the molecular determinants underlying disease progression and resistance to treatment. Here, using a phospho-flow cytometry approach we show that adult diagnostic B-cell acute lymphoblastic leukemia specimens display PI3K/Akt pathway hyperactivation, irrespective of their BCR-ABL status and despite paradoxically high basal expression of PTEN, the major negative regulator of the pathway. Protein kinase CK2 is known to phosphorylate PTEN thereby driving PTEN protein stabilization and concomitant PTEN functional inactivation. In agreement, we found that adult B-cell acute lymphoblastic leukemia samples show significantly higher CK2 kinase activity and lower PTEN lipid phosphatase activity than healthy controls. Moreover, the clinical-grade CK2 inhibitor CX-4945 (Silmitasertib) reversed PTEN levels in leukemia cells to those observed in healthy controls, and promoted leukemia cell death without significantly affecting normal bone marrow cells. Our studies indicate that CK2-mediated PTEN posttranslational inactivation, associated with PI3K/Akt pathway hyperactivation, are a common event in adult B-cell acute lymphoblastic leukemia and suggest that CK2 inhibition may constitute a valid, novel therapeutic tool in this malignancy.

Huntington's disease (HD) is an inherited neurodegenerative disease caused by a polyglutamine repeat expansion in the huntingtin protein. Mitochondrial dysfunction associated with energy failure plays an important role in this untreated pathology. In the present work, we used lymphoblasts obtained from HD patients or unaffected parentally related individuals to study the protective role of insulin-like growth factor 1 (IGF-1) versus insulin (at low nM) on signaling and metabolic and mitochondrial functions. Deregulation of intracellular signaling pathways linked to activation of insulin and IGF-1 receptors (IR,IGF-1R), Akt, and ERK was largely restored by IGF-1 and, at a less extent, by insulin in HD human lymphoblasts. Importantly, both neurotrophic factors stimulated huntingtin phosphorylation at Ser421 in HD cells. IGF-1 and insulin also rescued energy levels in HD peripheral cells, as evaluated by increased ATP and phosphocreatine, and decreased lactate levels. Moreover, IGF-1 effectively ameliorated O2 consumption and mitochondrial membrane potential (Δψm) in HD lymphoblasts, which occurred concomitantly with increased levels of cytochrome c. Indeed, constitutive phosphorylation of huntingtin was able to restore the Δψm in lymphoblasts expressing an abnormal expansion of polyglutamines. HD lymphoblasts further exhibited increased intracellular Ca(2+) levels before and after exposure to hydrogen peroxide (H2O2), and decreased mitochondrial Ca(2+) accumulation, being the later recovered by IGF-1 and insulin in HD lymphoblasts pre-exposed to H2O2. In summary, the data support an important role for IR/IGF-1R mediated activation of signaling pathways and improved mitochondrial and metabolic function in HD human lymphoblasts.

The cardiotoxicity induced by the anti-cancer doxorubicin involves increased oxidative stress, disruption of calcium homeostasis and activation of cardiomyocyte death. Nevertheless, antioxidants and caspase inhibitors often show little efficacy in preventing cell death. We hypothesize that a caspase-independent cell death mechanism with the release of the apoptosis-inducing factor from mitochondria is involved in doxorubicin toxicity. To test the hypothesis, H9c2 cardiomyoblasts were used as model for cardiac cells. Our results demonstrate that z-VAD-fmk, a pan-caspase inhibitor, does not prevent doxorubicin toxicity in this cell line. Doxorubicin treatment results in AIF translocation to the nuclei, as confirmed by Western Blotting of cell fractions and confocal microscopy. Also, doxorubicin treatment of H9c2 cardiomyoblasts resulted in the appearance of 50kbp DNA fragments, a hallmark of apoptosis-inducing factor nuclear effects. Apoptosis-inducing factor knockdown using a small-interfering RNA approach in H9c2 cells resulted in a reduction of doxorubicin toxicity, including decreased p53 activation and poly-ADP-ribose-polymerase cleavage. Among the proteases that could be responsible for apoptosis-inducing factor cleavage, doxorubicin decreased calpain activity but increased cathepsin B activation, with inhibition of the latter partly decreasing doxorubicin toxicity. Altogether, the results support that apoptosis-inducing factor release is involved in doxorubicin-induced H9c2 cell death, which explains the limited ability of caspase inhibitors to prevent toxicity.

Mitochondria play a key role in cell death and its regulation. The permeabilization of the outer mitochondrial membrane which is mainly controlled by proteins of the BCL-2 family, is a key event that can be directly induced by p53 and results in the release of pro-apoptotic factors to the cytosol, such as cytochrome c, second mitochondria derived activator of caspases/direct inhibitor-of-apoptosis (IAP) binding protein with low pI (SMAC/Diablo), Omi serine protease (Omi/HtrA2), apoptosis inducing factor (AIF), or endonuclease G (Endo-G). Hence, the determination of subcellular localization of these proteins is extremely important to predict cell fate and elucidate the specific mechanism of apoptosis. Here we describe the procedures that can be used to study the subcellular location of different pro-apoptotic proteins to be used in basic cell biology and toxicology studies.

The identification of rapid, reliable, and highly reproducible biological assays that can be standardized and routinely used in preclinical tests constitutes a promising approach to reducing drug discovery costs and time. This unit details a tandem, rapid, and reliable cell viability method for preliminary screening of chemical compounds. This assay measures metabolic activity and cell mass in the same cell sample using a dual resazurin/sulforhodamine B assay, eliminating the variation associated with cell seeding and excessive manipulations in assays that test different cell samples across plates. The procedure also reduces the amount of cells, test compound, and reagents required, as well as the time expended in conventional tests, thus resulting in a more confident prediction of toxic thresholds for the tested compounds. © 2016 by John Wiley & Sons, Inc.

Orthopedic implants are under incessant advancement to improve their interactions with surrounding bone tissue aiming to ensure successful outcomes for patients. A successful biological interaction between implant and surrounding bone depends on the combination of mechanical, physical and topological properties. Hence, Ti6Al4V cellular structures appear as very promising solutions towards the improvement of conventional orthopedic implants. This work addresses a set of fundamental tools that allow improving the design of Ti6Al4V cellular structures produced by Selective Laser Melting (SLM). Three-point bending tests were carried out to estimate the elastic modulus of the produced structures. Morphological analysis allowed to evaluate the dimensional differences that were noticed between the model CAD and the SLM structures. Finite element models (adjusted CAD) were constructed with the experimentally obtained dimensions to replicate the mechanical response of the SLM structures. Linear correlations were systematically found for the dimensions of the SLM structures as a function of the designed model CAD dimensions. This has also been observed for the measured porosities as a function of the designed CAD models. This data can be used in further FE analyses as design guidelines to help engineers fabricating near-net-shape SLM Ti6Al4V cellular structures. Besides, polished and sandblasted surface treatments performed on the Ti6Al4V cellular structures allowed to obtain suitable properties regarding roughness and wettability when compared to as-produced surfaces. The capillarity tests showed that all the analyzed Ti6Al4V structures are able to transport fluid along its structure. The cell viability tests demonstrate Ti6Al4V cellular structures SLM produced did not release toxic substances to the medium, indicating that these structures can assure a suitable environment for cells to proliferate and attach. This study proposes a design methodology for Ti6Al4V cellular structures, that owe suitable mechanical properties but also provide a proper combination of porosity, roughness, wettability, capillarity and cell viability, all of them relevant for orthopedic applications. A Ti6Al4V cellular structured hip implant prototype gathering the suitable features addressed in this study was successfully SLM-produced.

Parkinson's disease (PD) is a neurodegenerative disease with unknown etiology. Here we show the generation of an induced pluripotent stem cell (iPSC) line, named CSC-40, from dermal fibroblasts obtained from a 59-year-old male patient with a homozygous p.Q456X mutation in the PTEN-induced putative kinase 1 (PINK/PARK6) gene and a confirmed diagnosis of PD, which could be used to model familial PD. A non-integrating Sendai virus-based delivery of the reprogramming factors OCT3/4, SOX2, c-MYC and KLF4 was employed. The CSC-40 cell line showed normal karyotyping and fingerprinting following transduction as well as sustained expression of several pluripotency markers and the ability to differentiate into all three germ layers.