The design of nanocarriers for the delivery of drugs and nucleic-acids remains a very challenging goal due to their physicochemical differences. In addition, the reported accelerated clearance and immune response of pegylated nanomedicines highlight the necessity to develop carriers using new materials. Herein, we describe the synthesis of amphiphilic triblock poly(2-ethyl-2-oxazoline)–PLA-g–PEI (PEOz–PLA-g–PEI) micelles for the delivery of minicircle DNA (mcDNA) vectors. In this copolymer the generally used PEG moieties are replaced by the biocompatible PEOz polymer backbone that assembles the hydrophilic shell. The obtained results show that amphiphilic micelles have low critical micellar concentration, are hemocompatible and exhibit stability upon incubation in serum. The uptake in MCF-7 cells was efficient and the nanocarriers achieved 2.7 fold higher expression than control particles. Moreover, mcDNA-loaded micelleplexes penetrated into 3D multicellular spheroids and promoted widespread gene expression. Additionally, to prove the concept of co-delivery, mcDNA and doxorubicin (Dox) were simultaneously encapsulated in PEOz–PLA-g–PEI carriers, with high efficiency. Dox–mcDNA micelleplexes exhibited extensive cellular uptake and demonstrated anti-tumoral activity. These findings led us to conclude that this system has a potential not only for the delivery of novel mcDNA vectors, but also for the co-delivery of drug–mcDNA combinations without PEG functionalization.

The application of nanomaterials is regarded nowadays as a highly promising approach for overcoming the limitations of the currently available cancer treatments, contributing for the creation of more effective, precise, and safer therapies. In the last years, organosilica nanoparticles arisen as alternatives to the most common mesoporous silica nanoparticles. The organosilica nanoparticles combine the advantages of the mesoporous silica, such as structural stability and mesoporous structure, with the increased biocompatibility and biodegradability of organic materials. Therefore, the variety of organic bridges that can be incorporated into the silica matrix allowed the development of new and exciting compositions, properties, and functions for improving the therapeutic effectiveness of the anticancer nanomedicines. In this review, the strategies that have been explored to create stimuli-responsive organosilica-based drug delivery systems are highlighted, describing the practical approaches and mechanisms controlling the drug release. Additionally, the organosilica nanoparticles surface modifications aimed for increasing the blood circulation time and the tumor targeting are also described.

Cancer is a major health care problem with growing incidence, not only at a national level but also worldwide. Due to this urgency in reducing cancer prevalence, the scientific community has put forward a great attention in the search for novel anti-cancer treatments, particularly, in the development of nanocarriers capable to control and promote drug delivery to target cells. These drug delivery systems are capable to overcome the limitations presented by the conventional chemotherapeutic treatments. Among the various types of nanocarriers developed so far, mesoporous silica nanoparticles (MSNs) possess unique structural properties that make them highly suitable to encapsulate and deliver drugs to cancer cells. However, for these specialized nanocarriers to be applied in cancer therapies it is still of critical importance to control the time frame of drug release at the tumor microenvironment or inside cancer cells, in order to maximize the therapeutic effect and reduce unspecific cytotoxicity. One alternative to control drug release is to endow the nanocarriers with a pH responsive drug release that takes advantage of the naturally acidic tumor microenvironment and also of the acidic pH of lysosomes. In this thesis the development of dual drug loaded pH-responsive mesoporous silica nanoparticles (MSNs) with a calcium carbonate-based coating is presented as an effective alternative to deliver drugs to prostate cancer cells. This approach allowed the simultaneous co-encapsulation of a non-steroidal anti-inflammatory drug (Ibuprofen) and Doxorubicin (an anti-tumoral drug), with high efficiency. Furthermore, the idealized calcium carbonate coating successfully promoted a pH sensitive drug release from the MSNs matrix. The delivery systems proved to be capable of maintaining the drugs inside their mesoporous structure under physiological pH, and to prompt its release in acidic environments. The resulting dual loaded MSNs coated with calcium carbonate have spherical morphology and a mean size of 167 nm, presenting therefore, good characteristics to be applied as nanocarriers. Such, is supported by the cytotoxicity studies where the idealized MSNs produced a 93% higher anti-proliferative effect than the non-coated silica nanoparticles, being even more effective than the dual free drug administration, as well. Overall, the carbonate coating of MSNs showed to be a simple and cost-effective approach for cancer therapy, in particular for a pH-triggered drug delivery. Moreover, the versatile nature of these nanocarriers allows surface modifications that can improve the selectivity to target cells, allow imaging or even a combination of them both.

In comparison with 2D cell culture models, 3D spheroids are able to accurately mimic some features of solid tumors, such as their spatial architecture, physiological responses, secretion of soluble mediators, gene expression patterns and drug resistance mechanisms. These unique characteristics highlight the potential of 3D cellular aggregates to be used as in vitro models for screening new anticancer therapeutics, both at a small and large scale. Nevertheless, few reports have focused on describing the tools and techniques currently available to extract significant biological data from these models. Such information will be fundamental to drug and therapeutic discovery process using 3D cell culture models. The present review provides an overview of the techniques that can be employed to characterize and evaluate the efficacy of anticancer therapeutics in 3D tumor spheroids.

Nanocarriers with a pH responsive behavior are receiving an ever growing attention due to their potential for promoting on-demand drug release and thus increase the therapeutic effectiveness of anti-tumoral pharmaceutics. However, the majority of these systems require costly, time-consuming and complex chemical modifications of materials or drugs to synthesize nanoparticles with pH triggered release. Herein, the development of dual drug loaded pH-responsive mesoporous silica nanoparticles (MSNs) with a calcium carbonate-based coating is presented as an effective alternative. This innovative approach allowed the loading of a non-steroidal anti-inflammatory drug (Ibuprofen) and Doxorubicin, with high efficiency. The resulting dual drug loaded MSNs have spherical morphology and a mean size of 171 nm. Our results indicate that under acidic conditions the coating disassembles and the drugs are rapidly released, whereas at physiologic pH the release is slower and gradually increases with time. Furthermore, an improved cytotoxic effect was obtained for Doxorubicin–Ibuprofen MSNs coated with CaCO3 in comparison with non-coated particles. The cytotoxic effect of dual loaded carbonate coated particles, was similar to that of Doxorubicin + Ibuprofen free drug administration at 72 h, even with the delivery of a significantly lower amount of drug by MSNs-CaCO3. These results suggest that the carbonate coating of MSNs is a promising approach to create a pH-sensitive template for a delivery system with application in cancer therapy.

Aim: Enhance the colloidal stability and photothermal capacity of graphene oxide (GO) by functionalizing it with sulfobetaine methacrylate (SBMA)-grafted bovine serum albumin (BSA; i.e., SBMA-g-BSA) and by loading IR780, respectively. Materials & methods: SBMA-g-BSA coating and IR780 loading into GO was achieved through a simple sonication process. Results: SBMA-g-BSA-functionalized GO (SBMA-BSA/GO) presented an adequate size distribution and cytocompatibility. When in contact with biologically relevant media, the size of the SBMA-BSA/GO only increased by 8%. By loading IR780 into SBMA-BSA/GO, its photothermal capacity increased by twofold. The combination of near infrared light with SBMA-BSA/GO did not induce photocytotoxicity on breast cancer cells. In contrast, the interaction of IR780-loaded SBMA-BSA/GO with near infrared light caused the ablation of cancer cells. Conclusion: IR780-loaded SBMA-BSA/GO displayed an improved colloidal stability and phototherapeutic capacity.

Purpose Tumor targeting nanomaterials have potential for improving the efficiency of anti-tumoral therapeutics. However, the evaluation of their biological performance remains highly challenging. In this study we describe the synthesis of multifunctional nanoparticles decorated with folic acid-PEG and dual amino acid-modified chitosan (CM-PFA) complexed with DNA and their evaluation in organotypic 2D co-cultures of cancer-normal cells and also on 3D multicellular tumor spheroids models. Methods The physicochemical characterization of CM-PFA multifunctional carriers was performed by FTIR, 1H NMR and DLS. 2D co-culture models were established by using a 1:2 cancer-to-normal cell ratio. 3D organotypic tumor spheroids were assembled using micromolding technology for high throughput screening. Nanoparticle efficiency was evaluated by flow cytometry and confocal microscopy. Results The CM-PFA nanocarriers (126–176 nm) showed hemocompatibility and were internalized by target cells, achieving a 3.7 fold increase in gene expression. In vivo-mimicking 2D co-cultures confirmed a real affinity towards cancer cells and a negligible uptake in normal cells. The targeted nanoparticles penetrated into 3D spheroids to a higher extent than non-targeted nanocarriers. Also, CM-PFA-mediated delivery of p53 tumor suppressor promoted a decrease in tumor-spheroids volume. Conclusion These findings corroborate the improved efficiency of this delivery system and demonstrate its potential for application in cancer therapy.

The co-delivery of minicircle DNA (mcDNA) and small anti-cancer drugs via stimuli-sensitive nanocarriers is a promising approach for combinatorial cancer therapy. However, the simultaneous loading of drugs and DNA in nanosized delivery systems is remarkably challenging. In this study we describe the synthesis of triblock copolymer micelles based on poly(2-ethyl-2-oxazoline)–poly(L-lactide) grafted with bioreducible polyethylenimine (PEOz–PLA-g–PEI-SS) for co-delivery of supercoiled (sc) mcDNA vectors and Doxorubicin (Dox). These amphiphilic carriers take advantage of non-fouling oxazolines to confer biological stability, of PLA to provide a hydrophobic core for drug encapsulation and of bioreducible PEI-SS to provide mcDNA complexation and an on-demand stimuli-responsive release. The obtained results show that mcDNA-loaded micelleplexes penetrate into in vitro tumor spheroid models with specific kinetics and exhibit a higher gene expression when compared to non-bioreducible nanocarriers. Moreover, in vivo bioluminescence imaging showed that gene expression is detected up to 8 days following mcDNA-micelles intratumoral administration. Furthermore, drug–gene co-delivery in PEOz–PLA-g–PEI-SS carriers was verified by successful encapsulation of both Dox and mcDNA with high efficacy. Moreover, dual-loaded micelleplexes presented significant uptake and a cytotoxic effect in 2D cultures of cancer cells. The co-delivery of mcDNA-Dox to B16F10-Luciferase tumor bearing mice resulted in a reduction in tumor volume and cancer cells viability. Overall, such findings indicate that bioreducible triblock micelles are efficient for focal delivery in vivo and have potential for future application in combinatorial DNA-drug therapy.

Nanomaterials with responsiveness to near-infrared light can mediate the photoablation of cancer cells with an exceptional spatio-temporal resolution. However, the therapeutic outcome of this modality is limited by the nanostructures’ poor tumor uptake. To address this bottleneck, it is appealing to develop injectable in situ forming hydrogels due to their capacity to perform a tumor-confined delivery of the nanomaterials with minimal off-target leakage. In particular, injectable in situ forming hydrogels based on Pluronic F127 have been emerging due to their FDA-approval status, biocompatibility, and thermosensitive sol–gel transition. Nevertheless, the application of Pluronic F127 hydrogels has been limited due to their fast dissociation in aqueous media. Such limitation may be addressed by combining the thermoresponsive sol–gel transition of Pluronic F127 with other polymers with crosslinking capabilities. In this work, a novel dual-crosslinked injectable in situ forming hydrogel based on Pluronic F127 (thermosensitive gelation) and Chitosan (ionotropic gelation in the presence of NaHCO3), loaded with Dopamine-reduced graphene oxide (DOPA-rGO; photothermal nanoagent), was developed for application in breast cancer photothermal therapy. The dual-crosslinked hydrogel incorporating DOPA-rGO showed a good injectability (through 21 G needles), in situ gelation capacity and cytocompatibility (viability > 73 %). As importantly, the dual-crosslinking improved the hydrogel’s porosity and prevented its premature degradation. After irradiation with near-infrared light, the dual-crosslinked hydrogel incorporating DOPA-rGO produced a photothermal heating (ΔT ≈ 22 °C) that reduced the breast cancer cells’ viability to just 32 %. In addition, this formulation also demonstrated a good antibacterial activity by reducing the viability of S. aureus and E. coli to 24 and 33 %, respectively. Overall, the dual-crosslinked hydrogel incorporating DOPA-rGO is a promising macroscale technology for breast cancer photothermal therapy and antimicrobial applications.

The application of nanocarriers as selective drug delivery platforms, as imaging or as diagnostic agents has been evaluated in several studies in the area of biomedicine, namely for cancer therapy. Such systems have the potential to perform a controlled and site-specific delivery of therapeutic agents leading to a reduction of side effects and, ultimately, to an improved therapeutic outcome. Among the different nanocarriers developed so far, mesoporous silica nanoparticles have attracted the attention of the scientific community for being applied as drug delivery systems that are capable of controlling, both in space and time, the drug release. In this review, the modifications performed, so far, on mesoporous silica nanoparticles to imprint them a stimulus responsive behavior (namely, pH, redox potential, adenosine triphosphate, enzyme or temperature) in order to allow their application in cancer therapy are highlighted.